From: Tomasz Maciej Nowak <[email protected]> And enable the device.
Signed-off-by: Tomasz Maciej Nowak <[email protected]> --- .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts | 55 +++++++++++++------ target/linux/ipq40xx/image/generic.mk | 3 +- 3 files changed, 41 insertions(+), 18 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 3d05589369b5..d9a162b10d42 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -30,6 +30,7 @@ ipq40xx_setup_interfaces() cilab,meshpoint-one|\ edgecore,ecw5211|\ glinet,gl-b2200|\ + luma,wrtq-329acn|\ mikrotik,cap-ac|\ netgear,wac510) ucidef_set_interfaces_lan_wan "lan" "wan" diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts index 2407698fe1c8..4694c5681914 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts @@ -45,10 +45,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -213,6 +209,45 @@ status = "okay"; }; +&gmac { + status = "okay"; +}; + +ðphy0 { + status = "disabled"; +}; + +ðphy1 { + status = "disabled"; +}; + +ðphy3 { + status = "disabled"; +}; + +&mdio { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport3 { + status = "okay"; + + label = "lan"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_art_6>; +}; + +&swport5 { + status = "okay"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_art_0>; +}; + &tlmm { serial0_pins: serial0_pinmux { mux { @@ -252,18 +287,6 @@ status = "okay"; }; -ðphy0 { - status = "disabled"; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 47e8c129b49c..69ec42c26657 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -727,8 +727,7 @@ define Device/luma_wrtq-329acn BLOCKSIZE := 128k PAGESIZE := 2048 endef -# Missing DSA Setup -#TARGET_DEVICES += luma_wrtq-329acn +TARGET_DEVICES += luma_wrtq-329acn define Device/meraki_mr33 $(call Device/FitImage) -- 2.37.3 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
