The D-Link DWL-8610AP does not make use of the B53 switch like most equipment. It lies dormant and the machine is using eth0 and eth1 directly.
Signed-off-by: Linus Walleij <[email protected]> --- target/linux/bcm53xx/base-files/etc/board.d/02_network | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index c2e5afc5ed80..6bec600540ea 100644 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -16,6 +16,9 @@ bcm53xx_setup_interfaces() asus,rt-ac88u) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan" ;; + dlink,dwl-8610ap) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; linksys,panamera) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan" ;; -- 2.34.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
