This is no longer needed now that the kernel is built with a load
address that matches the one hard-coded in the bootloader.
Signed-off-by: Jan Hoffmann <j...@3e8.eu>
---
target/linux/realtek/image/Makefile | 14 --------------
target/linux/realtek/image/common.mk | 2 --
2 files changed, 16 deletions(-)
diff --git a/target/linux/realtek/image/Makefile
b/target/linux/realtek/image/Makefile
index 82390212e62d..3dfbcf67c166 100644
--- a/target/linux/realtek/image/Makefile
+++ b/target/linux/realtek/image/Makefile
@@ -71,20 +71,6 @@ define Build/h3c-vfs
mv $@.new $@
endef
-define Build/relocate-kernel
- rm -rf $@.relocate
- $(CP) ../../generic/image/relocate $@.relocate
- $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR)
LZMA_TEXT_START=0x82000000 \
- CROSS_COMPILE=$(TARGET_CROSS)
- ( \
- dd if=$@.relocate/loader.bin bs=32 conv=sync && \
- perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
- cat "$@" \
- ) > "$@.new"
- mv "$@.new" "$@"
- rm -rf $@.relocate
-endef
-
define Device/Default
PROFILES = Default
KERNEL := \
diff --git a/target/linux/realtek/image/common.mk
b/target/linux/realtek/image/common.mk
index 8f536bf15f58..214683f8e959 100644
--- a/target/linux/realtek/image/common.mk
+++ b/target/linux/realtek/image/common.mk
@@ -34,14 +34,12 @@ define Device/hpe_1920
KERNEL := \
kernel-bin | \
append-dtb | \
- relocate-kernel | \
7z | \
h3c-image | \
h3c-vfs
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
- relocate-kernel | \
7z | \
h3c-image
IMAGE/sysupgrade.bin := \
--
2.39.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
