On Thu, 26 Jan 2023, Arınç ÜNAL wrote:
Date: Thu, 26 Jan 2023 20:40:15
From: Arınç ÜNAL <[email protected]>
To: Enrico Mioso <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH] ramips: add support for Huasifei WS1208V2
On 26.01.2023 22:31, Enrico Mioso wrote:
On Thu, 26 Jan 2023, [email protected] wrote:
Date: Thu, 26 Jan 2023 19:35:27
From: [email protected]
To: [email protected]
Cc: Arınç ÜNAL <[email protected]>
Subject: [PATCH] ramips: add support for Huasifei WS1208V2
From: Arınç ÜNAL <[email protected]>
The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with
a
Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.
Specifications:
- MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
- MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
- Quectel RM520N-GL Cellular Modem
- 2 WLAN & 4 Cellular Antennas
- 5 Gigabit Ethernet Ports
- 1 USB 2.0 port
- 1 PCI-E Slot
- 1 M.2 slot
- 1 SIM card slot
- 1 SD card slot
Installation:
- Install sysupgrade image via ROOter OS.
Thanks a lot! Seems a nice device.
Does it offer any recovery mechanism? In case it does, would you mind
adding the procedure description to this commit? Thanks!
No special recovery mechanism is there. It's the usual tftp recovery with
U-Boot.
Thanks for the information. Maybe you can specify if the UART is needed and
write in the commit a suitable command to recover the device (e.g.: via
tftpboot if that's the right one).
Thanks again,
Enrico
Arınç
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
