The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---Hi Sander, Thanks for reviewing my patch! > On 28 Jan Reiwa 5, at 17:09, Sander Vanheule <[email protected]> wrote: > > Hi Mark, > > On Sun, 2023-01-22 at 12:46 +0100, Mark Ceeha wrote: >> Software version: >> soft_ver:1.0.3 Build 20220426 Rel. 32976 > > I assume this is the FW image you've based this on? My bad, this is the firmware version of the M4R that I upgraded; this patch was based on the following firmware image: soft_ver:1.0.2 Build 20220401 Rel. 35920 I just cross-referenced and confirmed it to match with the following initial firmware version I hadn't found before: soft_ver:1.0.0 Build 20211202 Rel. 69482 If preferred, I can include that version in the commit message instead. >> [...] > > Please leave an empty line between devices. ACK. >> [...] > > This is different from the version above. Does the device require this version > as a lower bound? Normally, usage of SOFT_VER_DEFAULT is preferred. As it was the version of the firmware image I researched, which is the initial firmware release, I figured it was a safe lower bound. TP-Link's own firmware expects it to be in the _TEXT format and >= current version to allow the upgrade, but U-Boot does not care. >> [...] > > Please use alphabetical sorting and put "DECO-M4R-V4" after "ARCHER-C6-V3". ACK. > Best, > Sander Feel free let let me know how you'd like the soft_ver to be handled, and I'll submit a v2. Kind regards, Shiz
--- End Message ---
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
