On 3.02.2023 16:03, Hauke Mehrtens wrote:
On 1/27/23 14:57, [email protected] wrote:
From: Arınç ÜNAL <[email protected]>
The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports
with a
Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.
Specifications:
- MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
- MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
- Quectel RM520N-GL Cellular Modem
- 2 WLAN & 4 Cellular Antennas
- 5 Gigabit Ethernet Ports
- 1 USB 2.0 port
- 1 PCI-E Slot
- 1 M.2 slot
- 1 SIM card slot
- 1 SD card slot
Installation:
- Install sysupgrade image via ROOter OS.
TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.
Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html
Signed-off-by: Arınç ÜNAL <[email protected]>
---
v2: Add recovery information.
---
.../ramips/dts/mt7621_huasifei_ws1208v2.dts | 187 ++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 12 ++
.../mt7621/base-files/etc/board.d/01_leds | 3 +
3 files changed, 202 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
diff --git a/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
new file mode 100644
index 0000000000..c69f05a0f4
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
@@ -0,0 +1,187 @@
.....
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+};
Please move this directly where you defined the factory partition in the
partitions node.
Will do.
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 2269833e48..bbd25e5be0 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -996,6 +996,18 @@ define Device/humax_e10
endef
TARGET_DEVICES += humax_e10
+define Device/huasifei_ws1208v2
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := Huasifei
+ DEVICE_MODEL := WS1208V2
+ DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2
kmod-sdhci-mt7620 \
+ kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option -wpad-basic-wolfssl
Why do you remove wpad-basic-wolfssl?
This shouldn't be there, thanks for pointing it out.
What is kmod-usb-net-cdc-mbim needed for?
That's to manage the cellular modem using the MBIM specification.
ModemManager or umbim can be used for this. Speaking of umbim, it would
be great if you could apply these fixes on umbim.
https://github.com/openwrt/openwrt/pull/4405
Arınç
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
