The EAP610 v3 has been listed on TP-Link's website and with the FCC since a few months. In contrast to the v1 and v2, this device was based on Mediatek hardware according to the firmware and FCC info. After fruitlessly waiting for this device revision to show up in retail, I recently came across the EAP613 v1, which appears to be a rebrand.
The device is very similar in setup to the EAP615-Wall, which helped a great deal in quickly porting OpenWrt. The anntenas on the PCB seem to suggest this board was designed around the MT7915, with an additional Bluetooth antenna, and an Rx antenna for background DFS detection. Since the device has a MT7905, one antenna is not populated, and the other (a PCB antenna) is most likely not used. If there are no comments, I would like to merge the patches later this week. Best, Sander Sander Vanheule (2): firmware-utils: bump to git HEAD ramips: mt7621: add TP-Link EAP613 v1 .../ramips/dts/mt7621_tplink_eap613-v1.dts | 155 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 13 ++ .../mt7621/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 1 + tools/firmware-utils/Makefile | 6 +- 5 files changed, 173 insertions(+), 3 deletions(-) create mode 100644 target/linux/ramips/dts/mt7621_tplink_eap613-v1.dts -- 2.41.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
