The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
++ Contact Team.
On 06/10/23 11:41, Nagumalla Venkata Uday Bhaskar wrote:
Dear OpenWRT TIP Mailing List,
My name is N. Venkata Uday Bhaskar, and I am writing to inquire about
the support for my device in OpenWRT. I hope you can provide guidance
on whether my device is supported or what steps are needed to add
support for it.
Device Information :::
Device Name and Model: Edge-core and ECS4125-10P
Hardware Specifications:: SOC - RTL9310, CPU - 1000MHz, LX - 200MHz,
DDR - 800MHz
Vty-1#show system
System Description : ECS4125-10P-TIPC
System OID String : 1.3.6.1.4.1.259.10.1.57
System Information
System Up Time : 6 days, 20 hours, 28 minutes, and 53.98 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : D0-77-CE-BD-65-68
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Fan:
Force Fan Speed Full : Disabled
Unit 1
Fan 1: Ok
Fan 1 speed: 8385 rpm
System Temperature:
Unit 1
Temperature 1 : 28 degrees
Rising Threshold : 62 degrees
Falling Threshold : 27 degrees
Unit 1
Main Power Status : Up
Vty-1#
Vty-1#show version
Unit 1
Serial Number : EC2323002952
Hardware Version : R01
Number of Ports : 10
Main Power Status : Up
Role : Master
Loader Version : 0.0.2.3
Linux Kernel Version : 4.4.153
Operation Code Version : 2.8.3.232
Vty-1#
I would also like to mention that I have access to documentation and
technical specifications for my device's hardware. I am willing to
provide any information or assistance that can help in the process of
adding support for my device in OpenWRT.
To assist in evaluating the device, I have attached clear photos of
the hardware, including the PCB and labels on key components.
I am eager to collaborate with the OpenWRT community to make this
device compatible with OpenWRT and contribute to the project. Please
let me know if there are specific steps I should follow or if you need
any additional information.
Thank you for your time and consideration. I look forward to your
response and any guidance you can provide.
Best regards,
N. V. Uday
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel