The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
The HP 560 Access Point features the
same baseboard as the MSM430, MSM460, MSM466.
Hardware
--------
CPU: Freescale P1020 2xe500 PPC
RAM: 256M DDR3 (Micron MT41J64M16JT-15E:G "D9MNJ")
NAND: 128M (Micron 2CA1)
BTN: 1x Reset
LED: Power - ETH - Radio1 - Radio2
UART: RJ-45 Cisco Pinout - 115200 8N1
PCIe1: ath10k 3x3:3 card
PCIe2: ath9k 3x3:3 card
PoE: 802.3at
Installation instructions are identical for msm460
and you can use the msm460 bootloader discussed in:
af329ec
"mpc85xx: add support for Hewlett Packard MSM460"
Known issues:
Tested on J9846A WW model.
Untested on J9845A, J9847A, J9848A.
Factory behaviour is 2.4ghz radio should
go to 2x2:2 to maintain 802.3af compliance.
This is untested.
Signed-off-by: Evan Jobling <evan.jobl...@mslsc.com.au>
---
.../files/arch/powerpc/boot/dts/hpe_560.dts | 7 +++++++
target/linux/mpc85xx/image/p1020.mk | 20 +++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 target/linux/mpc85xx/files/arch/powerpc/boot/dts/hpe_560.dts
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hpe_560.dts
b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hpe_560.dts
new file mode 100644
index 0000000000..500dfc9bf0
--- /dev/null
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hpe_560.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later or MIT
+
+#include "hp-5185-8967.dtsi"
+/ {
+ model = "Hewlett-Packard 560";
+ compatible = "hpe,560","hpe,msm460";
+};
diff --git a/target/linux/mpc85xx/image/p1020.mk
b/target/linux/mpc85xx/image/p1020.mk
index c310b26c87..0c4c8f9fb6 100644
--- a/target/linux/mpc85xx/image/p1020.mk
+++ b/target/linux/mpc85xx/image/p1020.mk
@@ -109,6 +109,26 @@ define Device/hpe_msm460
endef
TARGET_DEVICES += hpe_msm460
+define Device/hpe_560
+ DEVICE_VENDOR := Hewlett-Packard
+ DEVICE_MODEL := 560
+ DEVICE_DTS := hpe_560
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-board-qca9888
ath10k-firmware-qca988x-ct
+ KERNEL = kernel-bin | fit none $(KDIR)/image-$$(DEVICE_DTS).dtb
+ KERNEL_NAME := zImage.la3000000
+ KERNEL_ENTRY := 0x3000000
+ KERNEL_LOADADDR := 0x3000000
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 2048
+ KERNEL_IN_UBI := 1
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += hpe_560
+
define Device/ocedo_panda
DEVICE_VENDOR := OCEDO
DEVICE_MODEL := Panda
--
2.39.5
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
