Cudy WR1300 v4 is a MT7621 based dual-band router. Hardware: - SoC: MediaTek MT7621 - RAM: 128 MiB - Flash: 16 MiB SPI NOR - WiFi 2.4 GHz: MediaTek MT7603E - WiFi 5 GHz: MediaTek MT7663E - Ethernet: 5x 10/100/1000 Mbps - Buttons: Reset, WPS - LEDs: System, Internet, WAN, LAN1-4, WiFi 2.4 GHz, WiFi 5 GHz
The v4 hardware differs from v3 in GPIO assignments for LEDs and buttons. WiFi LEDs are connected to MT7621 GPIO5/GPIO6 and require the uart3 pin group to be muxed as GPIO. Tested on retail Cudy WR1300 v4: - sysupgrade image boots - WAN and LAN1-4 - 2.4 GHz and 5 GHz WiFi - Reset and WPS button events - System, Internet, WAN, LAN1-4 and WiFi LEDs Signed-off-by: Jan Brudna <[email protected]> --- .../ramips/dts/mt7621_cudy_wr1300-v4.dts | 111 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 12 ++ .../mt7621/base-files/etc/board.d/01_leds | 9 ++ 3 files changed, 132 insertions(+) create mode 100644 target/linux/ramips/dts/mt7621_cudy_wr1300-v4.dts diff --git a/target/linux/ramips/dts/mt7621_cudy_wr1300-v4.dts b/target/linux/ramips/dts/mt7621_cudy_wr1300-v4.dts new file mode 100644 index 0000000000..0f16d5142d --- /dev/null +++ b/target/linux/ramips/dts/mt7621_cudy_wr1300-v4.dts @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_cudy_wr1300-v2v3.dtsi" + +/ { + compatible = "cudy,wr1300-v4", "mediatek,mt7621-soc"; + model = "Cudy WR1300 v4"; + + /delete-node/ leds; + /delete-node/ keys; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + label-mac-device = &gmac0; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + + internet { + label = "green:internet"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + + lan4 { + label = "green:lan4"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + lan3 { + label = "green:lan3"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "green:lan2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "green:lan1"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>, <&macaddr_bdinfo_de00 0>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>, <&macaddr_bdinfo_de00 2>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&state_default { + gpio { + groups = "wdt", "i2c", "jtag", "uart3"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index cd595e72c4..76e2d6b43a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -821,6 +821,18 @@ define Device/cudy_wr1300-v3 endef TARGET_DEVICES += cudy_wr1300-v3 +define Device/cudy_wr1300-v4 + $(Device/dsa-migration) + IMAGE_SIZE := 15872k + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR1300 + DEVICE_VARIANT := v4 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \ + -uboot-envtools + SUPPORTED_DEVICES += cudy,wr1300 R30 +endef +TARGET_DEVICES += cudy_wr1300-v4 + define Device/cudy_wr2100 $(Device/dsa-migration) DEVICE_VENDOR := Cudy diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index eb4de3e03d..efede4b59e 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -7,6 +7,15 @@ board=$(board_name) board_config_update case $board in +cudy,wr1300-v4) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" "link tx rx" + ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1" "link tx rx" + ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2" "link tx rx" + ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3" "link tx rx" + ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4" "link tx rx" + ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "green:wlan5g" "phy1tpt" + ;; alfa-network,ax1800rm) ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" -- 2.34.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
