#15748: 802.11ac: high kernel-load and slow speed
--------------------------+-------------------------------------
Reporter: mario_lopes | Owner: developers
Type: enhancement | Status: reopened
Priority: normal | Milestone: Barrier Breaker (trunk)
Component: kernel | Version: Trunk
Resolution: | Keywords:
--------------------------+-------------------------------------
Changes (by mario_lopes):
* status: closed => reopened
* resolution: no_response =>
Comment:
Hi.
Sorry for not replying earlier.
I could not create a bridge, on syslog and dmesg, at AP shows the same
message as reported on #15738, at STA appears an error "daemon.notice
netifd: radio0 (924): Interface 0 setup failed: BRIDGE_NOT_ALLOWED".
Still, I managed to route traffic like this: (PC: iperf -c) -> (AP:
eth1<->wlan0) -> (STA: wlan0<->eth1) -> (PC: iperf -s)
I don't have any PC/laptop with wide mini-PCIe slot, so I can only test in
above setup.
The results were UDP reaching the server with under 100 MBit/s agreggated
bandwith, one or two iperf instances.
The top command shows around 45% sirq at AP, around 35 % sirq at AP. On
both cases the other percentages were 1 % or under.
Thanks.
--
Ticket URL: <https://dev.openwrt.org/ticket/15748#comment:3>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
