#14356: Netgear WNR2200 (OpenWrt isn't working)
--------------------------+-------------------------------------
Reporter: wrtop | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+-------------------------------------
Comment (by anonymous no.2):
Thanks to the anonymous chap above, that worked.
However, things of note on the current Trunk build:
If you wish to flash to another firmware using the web interface or mtp,
it will fail as there is no partition marked as "linux".
However you can hold the reset pin while powering on until the green light
flashes and use tftp to flash.
There is no web interface / Luci on this firmware so you need to be
familiar with using command line to install it, also the vi editor to get
online if you don't get your WAN connection using DHCP.
The LED for wifi does nothing.
PPPoE doesn't seem to support connect on demand, same settings with keep
alive work fine although the same behaviour is found on dd-wrt.
In the tests I made the wifi is slightly slower compared to the latest dd-
wrt build.
--
Ticket URL: <https://dev.openwrt.org/ticket/14356#comment:11>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
