#16896: The Clients cannot associate with the ar9341(ap123) with txrxmask=0x11
---------------------------+---------------------------------------
Reporter: yunleisd | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Attitude Adjustment 12.09
Component: packages | Version: Trunk
Keywords: txrxmask=0x11 |
---------------------------+---------------------------------------
Hi ,
I used the openwrt in ar9341 board, and restore the calibrate data in ART
block(mtdblock5), when I bringup the system and wifi ,it will read the
calibrate data from flash (mtdblock5). I only used main antenna and the
second antenna is not used. So the Mask.Tx=0x01 and Mask.Rx=0x01,the
txrxmask=0x11.Many devices with this calibrate data are ok.
But 2~3 devices have a phenomenon that all wifi clients cannot assosicate
with the ap. From the sniff log,we can see the clients have probe
request,but the aps have no response.
I changed the Mask.Tx=0x03 and Mask.Rx=0x03,the txrxmask=0x33, the
clients can associate with AP.
This several devices burn the code that released by athros sdk package,
the clients can associate with AP with txrxmask=0x33 or txrxmask=0x11.
Could help give some advices?
--
Ticket URL: <https://dev.openwrt.org/ticket/16896>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
