#13202: switch not configured properly on clean flash of WL-500W with daily
trunk
build
------------------------------+---------------------------------------
Reporter: iiordanov@… | Owner: hauke
Type: defect | Status: accepted
Priority: response-needed | Milestone: Attitude Adjustment 12.09
Component: base system | Version: Trunk
Resolution: | Keywords: switch configuration
------------------------------+---------------------------------------
Comment (by vaclav.ovsik@…):
Hi,
my son leave home with grandparents, so it is the right time for
experiments with his WL500W :). I forget some knowledge about OpenWrt, so
excuse maybe my confusion please.
I checkout and build image for WL500W from this revision:
{{{
zito@bobek:/data/openwrt/trunk$ svn info
Path: .
Working Copy Root Path: /data/openwrt/trunk
URL: svn://svn.openwrt.org/openwrt/trunk
Relative URL: ^/trunk
Repository Root: svn://svn.openwrt.org/openwrt
Repository UUID: 3c298f89-4303-0410-b956-a3cf2f4a3e73
Revision: 41613
Node Kind: directory
Schedule: normal
Last Changed Author: nbd
Last Changed Rev: 41599
Last Changed Date: 2014-07-13 12:24:34 +0200 (Sun, 13 Jul 2014)
}}}
After some problems and remembering I did flashing of a new image and this
is the first boot:
{{{
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ¥| 7¤ë 26 16:41:16 CST 2007 ([email protected])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B840 (636992)
Initialized Data: 0x808319B0 - 0x80834090 (9952)
BSS Area: 0x80834090 - 0x80835840 (6064)
Local Heap: 0x80835840 - 0x80899840 (409600)
Stack Area: 0x80899840 - 0x8089B840 (8192)
Text (code) segment: 0x80800000 - 0x808319B0 (203184)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-23-54-05-14-E0, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Reading :: TFTP Server.
Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3712 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 3.10.44 (zito@bobek) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.04 r41599) ) #1 Sun Jul 13 16:404
[ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300)
[ 0.000000] bcm47xx: using ssb bus
[ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00
[ 0.000000] Unsupported SPROM revision 0 detected. Will extract v1
[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
[ 0.000000] MIPS: machine is Asus WL500W
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16
bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases,
linesize 16 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 8128
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 29128k/32768k available (2311k kernel code, 3640k
reserved, 573k data, 180k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.070000] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 512
[ 0.070000] NET: Registered protocol family 16
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.120000] Switching to clocksource MIPS
[ 0.430000] PCI host bridge to bus 0000:00
[ 0.430000] pci_bus 0000:00: root bus resource [mem
0x40000000-0x7fffffff]
[ 0.430000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.430000] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.430000] ssb: PCI: Fixing up bridge 0000:00:00.0
[ 0.430000] ssb: PCI: Fixing up device 0000:00:00.0
[ 0.430000] ssb: PCI: Fixing latency timer of device 0000:00:00.0 to
168
[ 0.440000] pci 0000:00:02.0: BAR 0: assigned [mem
0x40000000-0x40003fff]
[ 0.440000] pci 0000:00:03.2: BAR 0: assigned [mem
0x40004000-0x400040ff]
[ 0.440000] pci 0000:00:03.0: BAR 4: assigned [io 0x0400-0x041f]
[ 0.440000] pci 0000:00:03.1: BAR 4: assigned [io 0x0420-0x043f]
[ 0.450000] PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
[ 0.450000] ssb: PCI: Fixing up device 0000:00:02.0
[ 0.490000] ssb: Found chip with id 0x4321, rev 0x01 and package 0x01
[ 0.580000] ssb: Sonics Silicon Backplane found on PCI device
0000:00:02.0
[ 0.580000] NET: Registered protocol family 2
[ 0.580000] TCP established hash table entries: 512 (order: 0, 4096
bytes)
[ 0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.580000] TCP: Hash tables configured (established 512 bind 512)
[ 0.580000] TCP: reno registered
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] NET: Registered protocol family 1
[ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.600000] msgmni has been set to 56
[ 0.600000] io scheduler noop registered
[ 0.600000] io scheduler deadline registered (default)
[ 0.600000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.620000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a
16550A
[ 0.970000] console [ttyS0] enabled
[ 1.000000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a
16550A
[ 1.010000] physmap platform flash device: 02000001 at 1c000000
[ 1.020000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank.
Manufacturer ID 0x000001 Chip ID 0x001301
[ 1.030000] Amd/Fujitsu Extended Query Table at 0x0040
[ 1.030000] Amd/Fujitsu Extended Query version 1.3.
[ 1.040000] number of CFI chips: 1
[ 1.050000] 6 bcm47xxpart partitions found on MTD device physmap-
flash.0
[ 1.060000] Creating 6 MTD partitions on "physmap-flash.0":
[ 1.070000] 0x000000000000-0x000000040000 : "boot"
[ 1.080000] 0x000000040000-0x0000007f0000 : "firmware"
[ 1.090000] 0x00000004001c-0x00000004090c : "loader"
[ 1.100000] 0x00000004090c-0x000000142000 : "linux"
[ 1.100000] mtd: partition "linux" must either start or end on erase
block boundary or be smaller than an erase block -- forciny
[ 1.120000] 0x000000142000-0x0000007f0000 : "rootfs"
[ 1.130000] mtd: partition "rootfs" must either start or end on erase
block boundary or be smaller than an erase block -- forciy
[ 1.140000] mtd: device 4 (rootfs) set to be root filesystem
[ 1.150000] mtd: partition "rootfs_data" created automatically,
ofs=0x300000, len=0x4f0000
[ 1.160000] 0x000000300000-0x0000007f0000 : "rootfs_data"
[ 1.170000] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.190000] libphy: Fixed MDIO Bus: probed
[ 1.200000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled
(30 seconds, Software Timer)
[ 1.210000] GPIO_WDT: failed to register misc device
[ 1.210000] TCP: cubic registered
[ 1.220000] NET: Registered protocol family 17
[ 1.220000] 8021q: 802.1Q VLAN Support v1.8
[ 1.240000] VFS: Mounted root (squashfs filesystem) readonly on device
31:4.
[ 1.250000] Freeing unused kernel memory: 180K (802d3000 - 80300000)
procd: Console is alive
procd: - watchdog -
[ 4.380000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version
2.0
[ 4.390000] libphy: b44_eth_mii: probed
[ 4.470000] b53_common: found switch: BCM5325, rev 0
[ 4.480000] b44 ssb0:0: attached PHY driver [Broadcom B53 (1)]
(mii_bus:phy_addr=1:1e)
[ 4.480000] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet
driver 00:23:54:05:14:e0
[ 4.500000] libphy: b44_eth_mii: probed
[ 4.500000] b44 ssb0:1: could not find PHY at 4, use fixed one
[ 4.510000] b44 ssb0:1: attached PHY driver [Generic PHY]
(mii_bus:phy_addr=fixed-0:00)
[ 4.520000] b44 ssb0:1 eth1: Broadcom 44xx/47xx 10/100 PCI ethernet
driver 00:23:54:05:14:e0
procd: - preinit -
[ 4.870000] b44 ssb0:0 eth0: Link is down
[ 5.880000] b44 ssb0:0 eth0: Link is down
[ 6.480000] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 6.480000] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
jffs2 is not ready - marker found
[ 10.770000] b44 ssb0:0 eth0: powering down PHY
procd: - early -
procd: - watchdog -
[ 11.590000] b44 ssb0:0 eth0: Link is down
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 15.510000] NET: Registered protocol family 10
[ 16.360000] wl: module license 'unspecified' taints kernel.
[ 16.360000] Disabling lock debugging due to kernel taint
[ 16.490000] SSB/BCMA glue driver successfully attached
[ 16.500000] ssb: PCI: Fixing up device 0000:00:02.0
[ 16.580000] wl0: Broadcom BCM4329 802.11 Wireless Controller 5.10.56.27
[ 16.620000] nf_conntrack version 0.5.0 (457 buckets, 1828 max)
[ 16.640000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.680000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.950000] xt_time: kernel timezone is -0000
[ 16.980000] PPP generic driver version 2.4.2
[ 16.990000] NET: Registered protocol family 24
[ 23.510000] b44 ssb0:0 eth0: Link is down
[ 23.520000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.520000] b44 ssb0:0 eth0: Link is down
[ 24.760000] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 24.760000] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 24.780000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.870000] b44 ssb0:0 eth0: powering down PHY
[ 28.910000] b44 ssb0:0 eth0: Link is down
[ 28.930000] b44 ssb0:0 eth0: Link is down
[ 28.930000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.990000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 29.010000] device eth0.1 entered promiscuous mode
[ 29.010000] device eth0 entered promiscuous mode
[ 29.050000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 29.160000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 29.760000] jffs2_scan_eraseblock(): End of filesystem marker found at
0x0
[ 29.820000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 29.820000] jffs2_build_filesystem(): erasing all blocks after the end
marker... [ 29.930000] b44 ssb0:0 eth0: Link is down
[ 30.910000] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 30.910000] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 30.940000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.950000] br-lan: port 1(eth0.1) entered forwarding state
[ 30.950000] br-lan: port 1(eth0.1) entered forwarding state
[ 30.960000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 30.970000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 31.000000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.950000] br-lan: port 1(eth0.1) entered forwarding state
done.
[ 71.910000] jffs2: notice: (738) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 0 of xdatum (0 unchecked, 0 or.
}}}
I hit enter then...
{{{
BusyBox v1.22.1 (2014-07-13 16:33:59 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r41599)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# brctl show
bridge name bridge id STP enabled interfaces
br-lan 7fff.0023540514e0 no eth0.1
root@OpenWrt:/# cat /etc/config/
dhcp dropbear firewall network system wireless
root@OpenWrt:/# cat /etc/config/network
config switch 'eth0'
option name 'eth0'
option reset '1'
option enable_vlan '1'
config switch_vlan 'eth0_1'
option device 'eth0'
option vlan '1'
option ports '1 2 3 4 5t'
config switch_vlan 'eth0_2'
option device 'eth0'
option vlan '2'
option ports '0 5t'
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd6d:5aa5:265d::/48'
config interface 'lan'
option ifname 'eth0.1'
option force_link '1'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
}}}
I can't ping 192.168.1.1 from my notebook still :(.
nvram show is long - I will attach this as text file without passwords.
--
Zito
--
Ticket URL: <https://dev.openwrt.org/ticket/13202#comment:10>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
