#17315: Ppp is killed by 11 signal during PPoE connection establishment
-----------------------+-----------------------------------
Reporter: prispav@… | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: packages | Version: Barrier Breaker 14.07
Keywords: |
-----------------------+-----------------------------------
Dear Developers,
I've reproduced the issue both using
> http://downloads.openwrt.org/barrier_breaker/14.07-rc1/ramips/rt305x
/openwrt-ramips-rt305x-dir-300-b1-squashfs-sysupgrade.bin
and
> http://downloads.openwrt.org/barrier_breaker/14.07-rc2/ramips/rt305x
/openwrt-ramips-rt305x-dir-300-b1-squashfs-sysupgrade.bin
I configure PPPoE connection using Luci.
> http://downloads.openwrt.org/attitude_adjustment/12.09/ramips/rt305x
/openwrt-ramips-rt305x-dir-300-b1-squashfs-sysupgrade.bin
works just perfect. I'd also used earlier versions (former trunk) before
12.09 released and some version from trunk around half an year ago without
this issue. The device is D-Link DIR-300 B3. Please let me know if I
should provide you with any additional information. I will flash with rc2
and provide you with the required information during this week.
--
Ticket URL: <https://dev.openwrt.org/ticket/17315>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
