#16589: ATH10k for Tp-Link Archer C7 V2
-----------------------------+----------------------------------
Reporter: optimizerapp@… | Owner: kaloz
Type: defect | Status: closed
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: packages | Version: Trunk
Resolution: fixed | Keywords:
-----------------------------+----------------------------------
Comment (by michal.kazior@…):
Replying to [comment:61 anatolik]:
> Thanks everyone for your help. I removed /etc/config/wireless and
regenerated it. Now my computers can see 5GHz network. But any attempt to
modify 5Ghz network settings via UI breaks it.
>
> I also suggest to update the wiki page and include information about
installing 'kmod-ath10k' package.
[...]
> {{{
> root@OpenWrt:/etc/config# iwinfo
> wlan0 ESSID: "BARFOO1"
> Access Point: E8:94:F6:AE:14:5E
> Mode: Master Channel: 36 (5.180 GHz)
> Tx-Power: 17 dBm Link Quality: 27/70
> Signal: -83 dBm Noise: -102 dBm
> Bit Rate: 6.0 MBit/s
> Encryption: WPA2 PSK (CCMP)
> Type: nl80211 HW Mode(s): 802.11nac
> Hardware: 168C:003C 0000:0000 [Generic MAC80211]
> TX power offset: unknown
> Frequency offset: unknown
> Supports VAPs: yes PHY name: phy0
> }}}
>
> It reports BitRate == 6Mbit/s. Is it very low rate?
http://wireless.kernel.org/en/users/Drivers/ath10k:
Known bugs/limitations
- tx rate is reported as 6mbps due to firmware limitation (no tx rate
information in tx completions); instead see
/sys/kernel/debug/ieee80211/phyX/ath10k/fw_stats
--
Ticket URL: <https://dev.openwrt.org/ticket/16589#comment:62>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
