#17518: "IPv6 WAN Status" on Status page shows "Not connected", but system has 
IPv6
address
-----------------------+-----------------------------------
 Reporter:  anonymous  |      Owner:
     Type:  defect     |     Status:  new
 Priority:  low        |  Milestone:
Component:  luci       |    Version:  Barrier Breaker 14.07
 Keywords:             |
-----------------------+-----------------------------------
 I am using BB RC3 on a WR703N. OpenWRT is configured as AP. I got a public
 IPv4 addr and a public IPv6 prefix from my provider and use IPv6 if
 possible.

 ETH0 is attached to my LAN and gets v4 addr and v6 addr from router.
 ifconfig shows this addresses:
 root@wr703n02:~# ifconfig
 br-lan    Link encap:Ethernet  HWaddr 14:CF:92:6D:xx:xx
           inet addr:192.168.178.67  Bcast:192.168.178.255
 Mask:255.255.255.0
           inet6 addr: 2a02:xxxx:xxxx:xxxx:xxxx:xxx:fe6d:xxxx/64
 Scope:Global
           inet6 addr: fe80::16cf:92ff:fe6d:xxxx/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:23251 errors:0 dropped:0 overruns:0 frame:0
           TX packets:7630 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:1839753 (1.7 MiB)  TX bytes:1708722 (1.6 MiB)

 eth0      Link encap:Ethernet  HWaddr 14:CF:92:6D:xx:xx
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:30556 errors:0 dropped:3 overruns:0 frame:0
           TX packets:7749 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:3944584 (3.7 MiB)  TX bytes:1718762 (1.6 MiB)
           Interrupt:4

 lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:65536  Metric:1
           RX packets:65 errors:0 dropped:0 overruns:0 frame:0
           TX packets:65 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:4190 (4.0 KiB)  TX bytes:4190 (4.0 KiB)

 wlan0     Link encap:Ethernet  HWaddr 14:CF:92:6D:xx:xx
           inet6 addr: fe80::16cf:92ff:fe6d:xxxx/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:6 errors:0 dropped:0 overruns:0 frame:0
           TX packets:16260 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:558 (558.0 B)  TX bytes:1516815 (1.4 MiB)

 Problem is with web interface. On the status page it got a "IPv4 WAN
 Status" vor v4, but says "not connected" for v6. Bug or "works as
 designed"? If "works as designed", it seems inconsistent with v4
 behaviour.

 IPv4 WAN Status

 br-lan  Type: dhcp
 Address: 192.168.178.67
 Netmask: 255.255.255.0
 Gateway: 192.168.178.1
 DNS 1: 192.168.178.1
 Connected: 1h 9m 28s

 IPv6 WAN Status

 ?       Not connected

--
Ticket URL: <https://dev.openwrt.org/ticket/17518>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to