#17605: Incorrect display wan status in luci
------------------------------+--------------------------------------
Reporter: levshinovsky@… | Owner:
Type: defect | Status: closed
Priority: response-needed | Milestone: Barrier Breaker 14.07
Component: luci | Version: Barrier Breaker 14.07
Resolution: not_a_bug | Keywords: wrong WAN status display
------------------------------+--------------------------------------
Comment (by levshinovsky@…):
I found a problem:
In Luci->network->interfaces->LAN
IF SET ONLY: prot=static, IPv4=192.168.51.1, mask=255.255.255.0
THEN OK. (Luci->status: wan interface = eth0 and ubus output is right too)
BUT IF SET: prot=static, IPv4=192.168.51.1, mask=255.255.255.0 + GATEWAY=
192.168.51.1
THEN Luci->status: wan interface = lan-br (with attached ubus output)
Is it right?
--
Ticket URL: <https://dev.openwrt.org/ticket/17605#comment:6>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
