#17661: x86 14.07-rc3 boot fail, reboot looping
-----------------------------------+-----------------------------------
Reporter: phil.lxnet@… | Owner: developers
Type: defect | Status: new
Priority: highest | Milestone: Barrier Breaker 14.07
Component: base system | Version: Barrier Breaker 14.07
Keywords: grub boot via eden c3 |
-----------------------------------+-----------------------------------
My EPIA V VIA C3 (E-Series) 533A system fails to boot with just:-
Verify DMI Pool Data....
GRUB loading ...
then the system immediately reboots
I have tried with identical results the combined-ext4 images for all of
the following:-
x86 generic 14.07-rc3
snapshot 23/08/2014
alix2
net5501
This same board previously worked very well with x86 generic 12.09.
I am prepared to try and help out with this and have built openwrt
previously but am about a year out of date with build procedures so pretty
rusty.
Let me know what I can try to diagnose this.
I have ensured a serial port is available, and have tried all obvious chs,
lba, non udma etc
install is on a 64MB CHH (old solid state hdd, tried 2 of them) via:-
sudo dd if=openwrt-x86-generic-combined-ext4.img of=/dev/sdb
--
Ticket URL: <https://dev.openwrt.org/ticket/17661>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
