#16467: sporadic USB-Errors on TP-LINK WR710Nv1.1 with LTE-Stick
------------------------+---------------------------------------
  Reporter:  anonymous  |      Owner:  developers
      Type:  defect     |     Status:  new
  Priority:  high       |  Milestone:  Chaos Calmer (trunk)
 Component:  kernel     |    Version:  Trunk
Resolution:             |   Keywords:  WR710Nv1 USB ISSUES ATH9K
------------------------+---------------------------------------

Comment (by jmomo):

 I am having very similar problems with at least two different TP-Link TL-
 WR710N.

 An image gallery and full info on at least one of the devices can be seen
 here. One should be able to read the labels off the chips, see the PCB,
 bootlog, etc:

 https://forum.openwrt.org/viewtopic.php?pid=238822



 In my case, I am using USB to RS232/serial adapters to connect to the
 console ports on a variety of networking equipment (Cisco, Juniper, etc).
 My connections are failing and I am seeing errors in the kernel log.

 The problem is very chronic intermittent. Yesterday I couldn't make it
 stop. Today I can't reproduce the issue at all. Very strange.

 I have definitely seen the issue on r42397. I think I've also seen it on
 r41556.  I have two hardware units and both show similar symptoms.

 The serial adapters are multiple and with different chipsets. I have
 Pl2303s, FTDIs, and CH341s all having the same problem.

 --

 Here is a failure with FTDI-based device.
 Caused by repeated insert/removals.

 [ 2173.300000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
 [ 2173.310000] usb 1-1: Detected FT232RL
 [ 2173.310000] usb 1-1: Number of endpoints 2
 [ 2173.310000] usb 1-1: Endpoint 1 MaxPacketSize 16384
 [ 2173.320000] usb 1-1: Endpoint 2 MaxPacketSize 16384
 [ 2173.320000] usb 1-1: Setting MaxPacketSize 64
 [ 2173.340000] usb 1-1: FTDI USB Serial Device converter now attached to
 ttyUSB0
 [ 2184.440000] usb 1-1: USB disconnect, device number 9
 [ 2184.450000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
 disconnected from ttyUSB0
 [ 2184.460000] ftdi_sio 1-1:1.0: device disconnected
 [ 2186.950000] usb 1-1: new full-speed USB device number 10 using ehci-
 platform
 [ 2187.120000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
 [ 2187.130000] usb 1-1: Detected FT232RL
 [ 2187.130000] usb 1-1: Number of endpoints 2
 [ 2187.130000] usb 1-1: Endpoint 1 MaxPacketSize 16384
 [ 2187.140000] usb 1-1: Endpoint 2 MaxPacketSize 16384
 [ 2187.140000] usb 1-1: Setting MaxPacketSize 64
 [ 2187.160000] usb 1-1: FTDI USB Serial Device converter now attached to
 ttyUSB0
 [ 2198.540000] usb 1-1: USB disconnect, device number 10
 [ 2198.540000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
 disconnected from ttyUSB0
 [ 2198.560000] ftdi_sio 1-1:1.0: device disconnected
 [ 2210.320000] usb 1-1: new full-speed USB device number 11 using ehci-
 platform
 [ 2211.120000] usb 1-1: new full-speed USB device number 12 using ehci-
 platform
 [ 2211.810000] usb 1-1: new full-speed USB device number 13 using ehci-
 platform
 [ 2214.280000] usb 1-1: new full-speed USB device number 14 using ehci-
 platform
 [ 2219.660000] usb 1-1: new full-speed USB device number 15 using ehci-
 platform
 [ 2230.050000] usb 1-1: new full-speed USB device number 16 using ehci-
 platform
 [ 2245.910000] usb 1-1: new full-speed USB device number 18 using ehci-
 platform
 [ 2258.270000] usb 1-1: new full-speed USB device number 19 using ehci-
 platform
 [ 2273.450000] usb 1-1: device descriptor read/64, error -145
 [ 2288.740000] usb 1-1: device descriptor read/64, error -145
 [ 2288.970000] usb 1-1: new full-speed USB device number 20 using ehci-
 platform
 [ 2304.150000] usb 1-1: device descriptor read/64, error -145
 [ 2319.440000] usb 1-1: device descriptor read/64, error -145
 [ 2319.670000] usb 1-1: new full-speed USB device number 21 using ehci-
 platform
 [ 2330.130000] usb 1-1: device not accepting address 21, error -145
 [ 2330.250000] usb 1-1: new full-speed USB device number 22 using ehci-
 platform
 [ 2340.710000] usb 1-1: device not accepting address 22, error -145
 [ 2340.710000] hub 1-0:1.0: unable to enumerate USB device on port 1

 --

 Here is the other device at a remote location. Trying out both the ch341
 and FTDI adapters and they are failing on the USB bus.

 [33118.320000] usb 1-1: USB disconnect, device number 2
 [33118.330000] ch341-uart ttyUSB0: ch341-uart converter now disconnected
 from ttyUSB0
 [33118.340000] ch341 1-1:1.0: device disconnected
 [33124.270000] usb 1-1: new full-speed USB device number 3 using ehci-
 platform
 [33124.430000] ch341 1-1:1.0: ch341-uart converter detected
 [33124.450000] usb 1-1: ch341-uart converter now attached to ttyUSB0
 [33439.990000] usb 1-1: USB disconnect, device number 3
 [33439.990000] usb 1-1: ch341_read_int_callback - usb_submit_urb failed
 with result -19
 [33440.010000] ch341-uart ttyUSB0: ch341-uart converter now disconnected
 from ttyUSB0
 [33440.010000] ch341 1-1:1.0: device disconnected
 [33443.640000] usb 1-1: new full-speed USB device number 4 using ehci-
 platform
 [33443.800000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
 [33443.820000] usb 1-1: Detected FT8U232AM
 [33443.820000] usb 1-1: Number of endpoints 2
 [33443.820000] usb 1-1: Endpoint 1 MaxPacketSize 16384
 [33443.830000] usb 1-1: Endpoint 2 MaxPacketSize 16384
 [33443.830000] usb 1-1: Setting MaxPacketSize 64
 [33443.850000] usb 1-1: FTDI USB Serial Device converter now attached to
 ttyUSB0
 [35149.180000] usb 1-1: USB disconnect, device number 4
 [35149.190000] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set
 baudrate
 [35149.200000] ftdi_sio ttyUSB0: urb failed to clear flow control
 [35149.210000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
 disconnected from ttyUSB0
 [35149.210000] ftdi_sio 1-1:1.0: device disconnected
 [35163.530000] usb 1-1: new full-speed USB device number 5 using ehci-
 platform
 [35163.690000] ch341 1-1:1.0: ch341-uart converter detected
 [35163.710000] usb 1-1: ch341-uart converter now attached to ttyUSB0
 [35528.260000] usb 1-1: USB disconnect, device number 5
 [35528.270000] usb 1-1: ch341_read_int_callback - usb_submit_urb failed
 with result -19
 [35528.300000] ch341-uart ttyUSB0: ch341-uart converter now disconnected
 from ttyUSB0
 [35528.310000] ch341 1-1:1.0: device disconnected
 [35533.370000] usb 1-1: new full-speed USB device number 6 using ehci-
 platform
 [35533.530000] ch341 1-1:1.0: ch341-uart converter detected
 [35533.550000] usb 1-1: ch341-uart converter now attached to ttyUSB0
 [35646.570000] usb 1-1: USB disconnect, device number 6
 [35646.580000] usb 1-1: ch341_read_int_callback - usb_submit_urb failed
 with result -19
 [35646.590000] ch341-uart ttyUSB0: ch341-uart converter now disconnected
 from ttyUSB0
 [35646.610000] ch341 1-1:1.0: device disconnected
 [35650.830000] usb 1-1: new full-speed USB device number 7 using ehci-
 platform
 [35666.010000] usb 1-1: device descriptor read/64, error -145
 [35681.320000] usb 1-1: device descriptor read/64, error -145
 [35681.560000] usb 1-1: new full-speed USB device number 8 using ehci-
 platform
 [35696.740000] usb 1-1: device descriptor read/64, error -145
 [35712.030000] usb 1-1: device descriptor read/64, error -145
 [35712.260000] usb 1-1: new full-speed USB device number 9 using ehci-
 platform
 [35722.720000] usb 1-1: device not accepting address 9, error -145
 [35722.840000] usb 1-1: new full-speed USB device number 10 using ehci-
 platform
 [35733.300000] usb 1-1: device not accepting address 10, error -145
 [35733.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
 [35820.460000] usb 1-1: new full-speed USB device number 11 using ehci-
 platform
 [35835.640000] usb 1-1: device descriptor read/64, error -145
 [35850.930000] usb 1-1: device descriptor read/64, error -145
 [35851.160000] usb 1-1: new full-speed USB device number 12 using ehci-
 platform
 [35866.340000] usb 1-1: device descriptor read/64, error -145
 [35881.630000] usb 1-1: device descriptor read/64, error -145
 [35881.860000] usb 1-1: new full-speed USB device number 13 using ehci-
 platform
 [35892.320000] usb 1-1: device not accepting address 13, error -145
 [35892.440000] usb 1-1: new full-speed USB device number 14 using ehci-
 platform
 [35902.900000] usb 1-1: device not accepting address 14, error -145
 [35902.900000] hub 1-0:1.0: unable to enumerate USB device on port 1

 --

--
Ticket URL: <https://dev.openwrt.org/ticket/16467#comment:2>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to