#17839: Reboot command causes sometimes hanging router with TL-WDR3600 (HW V1.5)
and TL-WDR4300 (HW V1.7)
--------------------------+-----------------------------------
Reporter: michaeluray | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Barrier Breaker 14.07
Component: base system | Version: Barrier Breaker 14.07
Resolution: | Keywords: reboot
--------------------------+-----------------------------------
Comment (by _Steffen_):
Replying to [comment:39 lc]:
> Can you guys check which RAM you have on your boards? Can you confirm
our findings?
I have got a TL-WDR3600 '''V1.5''' with Zentel A3R12E40CBF with '''reboot
problems'''.
I have got a TL-WDR3600 '''V1.4''' with Winbond W9751G6KB-25 without
problems.
This confirms your findings.
All TL-WDR3600 of version V1.4 that I know are working fine. Reboot
problems occurs only with version V1.5.
My V1.5 router under test shows the reboot problem with different OpenWRT
versions AA, trunk, BB.
The last outputs at the serial console are looking pretty much the same as
posted from ctbenergy.
The problem occurs less often if procd debug mode 4 is active on my tests
(current stable BB release firmware image with default configuration).
--
Ticket URL: <https://dev.openwrt.org/ticket/17839#comment:40>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
