#18059: Barrier Breaker Final Release
-------------------------+-----------------------------------
Reporter: skynet.dm@… | Owner: developers
Type: defect | Status: new
Priority: highest | Milestone: Barrier Breaker 14.07
Component: base system | Version: Barrier Breaker 14.07
Keywords: broken WiFi |
-------------------------+-----------------------------------
Installed openwrt-wndr3700_v3-squashfs.chk (Barrier Breaker Final
release): OpenWrt Barrier Breaker 14.07 / LuCI Trunk (0.12+svn-r10530) on
to Netgear WNDR3700v3.
The image came from openwrt.org web-site:
http://downloads.openwrt.org/barrier_breaker/14.07/brcm47xx/mips74k
/openwrt-wndr3700_v3-squashfs.chk
After flashing from Netgear Stock Firmware:
1. Router restarted fine, able to log in to the web-gui.
2. OS failed to detect correct ver of the hardware:
"Model Unknown Board"
3. Wifi radios seem to have a wrong driver used.
There is two radios one for 2.4 band and second for 5GHz.
The 5 GHz radio only operates now on 2.4 GHz band and NOT on 5GHz band.
4. LED for WiFi interfaces do NOT turn on at all.
Questions:
1. How do I revert back to the stock Netgear Firmware.
Please advise because Wifi in the current state is not usable.
Thank you.
Here's the logs:
System Log:
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.150000] bcma: core
0x0820, irq : 2(S) 3 4 5 6* D I
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.150000] bcma: core
0x082e, irq : 2(S) 3 4 5 6 D* I
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.150000] bcma: core
0x080e, irq : 2(S) 3 4 5 6 D I*
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.150000] bcma: core
0x0834, irq : 2(S)* 3 4 5 6 D I
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.150000] bcma: bus0:
PCIEcore in host mode found
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] PCI host bridge
to bus 0000:00
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] pci_bus 0000:00:
root bus resource [mem 0x08000000-0x0bffffff]
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] pci_bus 0000:00:
root bus resource [io 0x0100-0x07ff]
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] pci_bus 0000:00:
No busn resource found for root bus, will use [bus 00-ff]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.0: [14e4:4716] type 00 class 0x060000
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up bridge 0000:00:00.0
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up device 0000:00:00.0
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.0: reg 18: [mem 0x00000000-0x07ffffff 64bit]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.0: supports D1 D2
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.1: [14e4:0000] type 00 class 0x060000
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up bridge 0000:00:00.1
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up device 0000:00:00.1
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.1: reg 18: [mem 0x00000000-0x07ffffff 64bit]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:00.1: supports D1 D2
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:01.0: [14e4:4331] type 00 class 0x028000
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up addresses 0000:00:01.0
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] pci
0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci
0000:00:01.0: supports D1 D2
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] pci_bus
0000:00: busn_res: [bus 00-ff] end is updated to 00
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 0.330000] PCI: Enabling
device 0000:00:01.0 (0000 -> 0002)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: PCI:
Fixing up device 0000:00:01.0
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: change
PCIe max read request size from 512 to 128
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: bus1:
Found chip with id 0x4331, rev 0x02 and package 0x08
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: bus1: Core
0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: bus1: Core
1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.330000] bcma: bus1: Core
2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] bcma: bus1:
Found rev 10 PMU (capabilities 0x108C260A)
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.330000] bcma: bus1:
SPROM offset 0x800
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 0.420000] bcma: bus1:
Invalid SPROM read from the PCIe card, trying to use fallback SPROM
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.440000] bcma: bus1:
Using SPROM revision 9 provided by platform.
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 0.440000] bcma: bus1: PMU
resource config unknown or not needed for device 0x4331
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.450000] bcma: bus1: Bus
registered
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] bcma: bus0: Bus
registered
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] squashfs:
version 4.0 (2009/01/31) Phillip Lougher
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] jffs2: version
2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red
Hat, Inc.
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] msgmni has been
set to 120
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] io scheduler
noop registered
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] io scheduler
deadline registered (default)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.460000] Serial:
8250/16550 driver, 16 ports, IRQ sharing enabled
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.490000] serial8250.0:
ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 0.970000] console [ttyS0]
enabled
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.080000] 7 bcm47xxpart
partitions found on MTD device bcm47xxsflash
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.090000] Creating 7 MTD
partitions on "bcm47xxsflash":
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.100000]
0x000000000000-0x000000040000 : "boot"
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.100000]
0x000000040000-0x0000007e0000 : "firmware"
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.110000]
0x00000004001c-0x00000004090c : "loader"
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.120000]
0x00000004090c-0x00000014d000 : "linux"
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 1.120000] mtd: partition
"linux" must either start or end on erase block boundary or be smaller
than an erase block -- forcing read-only
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.140000]
0x00000014d000-0x0000007e0000 : "rootfs"
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 1.140000] mtd: partition
"rootfs" must either start or end on erase block boundary or be smaller
than an erase block -- forcing read-only
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.160000] mtd: device 4
(rootfs) set to be root filesystem
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.170000] mtd: partition
"rootfs_data" created automatically, ofs=0x360000, len=0x480000
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.170000]
0x000000360000-0x0000007e0000 : "rootfs_data"
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.180000]
0x0000007e0000-0x0000007f0000 : "board_data"
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.190000]
0x0000007f0000-0x000000800000 : "nvram"
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.200000] bgmac bcma0:1:
Found PHY addr: 30 (NOREGS)
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 1.210000] bgmac bcma0:1:
Support for Roboswitch not implemented
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.220000] libphy: bgmac
mii bus: probed
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.300000] b53_common:
found switch: BCM53115, rev 8
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.310000] bgmac: Broadcom
47xx GBit MAC driver loaded
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.310000] bcm47xx-wdt
bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.320000] TCP: cubic
registered
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.330000] NET: Registered
protocol family 17
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 1.330000] Bridge
firewalling registered
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.330000] 8021q: 802.1Q
VLAN Support v1.8
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.350000] VFS: Mounted
root (squashfs filesystem) readonly on device 31:4.
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 1.360000] Freeing unused
kernel memory: 168K (802e6000 - 80310000)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 6.340000] libphy:
bgmac-0-0:1e - Link is Up - 1000/Full
Wed Oct 1 12:57:46 2014 kern.notice kernel: [ 8.070000] jffs2: notice:
(231) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of
xdatum (0 unchecked, 1 orphan) and 20 of xref (0 dead, 12 orphan) found.
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.830000] NET: Registered
protocol family 10
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.850000] nf_conntrack
version 0.5.0 (964 buckets, 3856 max)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.860000] ip6_tables: (C)
2000-2006 Netfilter Core Team
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.880000] Loading modules
backported from Linux version master-2014-05-22-0-gf2032ea
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.890000] Backport
generated by backports.git backports-20140320-37-g5c33da0
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.900000] ip_tables: (C)
2000-2006 Netfilter Core Team
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 11.960000] xt_time: kernel
timezone is -0000
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.000000] cfg80211:
Calling CRDA to update world regulatory domain
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.000000] cfg80211: World
regulatory domain updated:
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.010000] cfg80211: DFS
Master region: unset
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.010000] cfg80211:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.020000] cfg80211:
(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.030000] cfg80211:
(2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.040000] cfg80211:
(2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.050000] cfg80211:
(5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.060000] cfg80211:
(5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.060000] cfg80211:
(5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.070000] cfg80211:
(5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.080000] cfg80211:
(57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.170000] PPP generic
driver version 2.4.2
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.180000] NET: Registered
protocol family 24
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.210000] b43-phy0:
Broadcom 4331 WLAN found (core revision 29)
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 12.210000] bcma: bus1:
Switched to core: 0x812
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.210000] b43-phy0: Found
PHY: Analog 9, Type 7 (HT), Revision 1
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.220000] b43-phy0: Found
Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
Wed Oct 1 12:57:46 2014 kern.warn kernel: [ 12.230000] b43-phy0
warning: 5 GHz band is unsupported on this PHY
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.230000] b43-phy1:
Broadcom 4716 WLAN found (core revision 17)
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.310000] b43-phy1: Found
PHY: Analog 8, Type 4 (N), Revision 5
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.320000] b43-phy1: Found
Radio: Manuf 0x17F, ID 0x2056, Revision 7, Version 0
Wed Oct 1 12:57:46 2014 kern.info kernel: [ 12.330000] Broadcom 43xx
driver loaded [ Features: NL ]
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 12.450000] ieee80211 phy0:
Selected rate control algorithm 'minstrel_ht'
Wed Oct 1 12:57:46 2014 kern.debug kernel: [ 12.520000] ieee80211 phy1:
Selected rate control algorithm 'minstrel_ht'
Wed Oct 1 12:57:49 2014 kern.info kernel: [ 18.070000] libphy:
bgmac-0-0:1e - Link is Up - 1000/Full
Wed Oct 1 12:57:50 2014 authpriv.info dropbear[682]: Not backgrounding
Wed Oct 1 12:57:52 2014 user.emerg syslog: - init complete -
Wed Oct 1 12:57:53 2014 kern.info kernel: [ 22.270000] device eth0.1
entered promiscuous mode
Wed Oct 1 12:57:53 2014 kern.info kernel: [ 22.280000] device eth0
entered promiscuous mode
Wed Oct 1 12:57:53 2014 kern.info kernel: [ 22.280000] br-lan: port
1(eth0.1) entered forwarding state
Wed Oct 1 12:57:53 2014 kern.info kernel: [ 22.290000] br-lan: port
1(eth0.1) entered forwarding state
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'lan' is enabled
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'lan' is setting
up now
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'lan' is now up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'loopback' is
enabled
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'loopback' is
setting up now
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'loopback' is now
up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'wan' is enabled
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Network device 'eth0' link
is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'wan' has link
connectivity
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'wan' is setting
up now
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.1' link is down
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'lan' has link
connectivity
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Network device 'lo' link is
up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'loopback' has
link connectivity
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.2' link is down
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'wan' has link
connectivity loss
Wed Oct 1 12:57:53 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Oct 1 12:57:53 2014 daemon.notice netifd: Interface 'wan' has link
connectivity
Wed Oct 1 12:57:54 2014 daemon.notice netifd: wan (808): udhcpc (v1.22.1)
started
Wed Oct 1 12:57:54 2014 kern.info kernel: [ 23.330000] libphy:
bgmac-0-0:1e - Link is Up - 1000/Full
Wed Oct 1 12:57:54 2014 user.notice firewall: Reloading firewall due to
ifup of lan (br-lan)
Wed Oct 1 12:57:54 2014 daemon.notice netifd: wan (808): Sending
discover...
Wed Oct 1 12:57:55 2014 kern.info kernel: [ 24.290000] br-lan: port
1(eth0.1) entered forwarding state
Wed Oct 1 12:57:55 2014 kern.info kernel: [ 24.970000] b43-phy1:
Loading firmware version 666.2 (2011-02-23 01:15:07)
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.460000] IPv6:
ADDRCONF(NETDEV_UP): wlan1: link is not ready
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.470000] device wlan1
entered promiscuous mode
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.640000] b43-phy0:
Loading firmware version 666.2 (2011-02-23 01:15:07)
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.760000] IPv6:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.770000] device wlan0
entered promiscuous mode
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.770000] br-lan: port
3(wlan0) entered forwarding state
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.780000] br-lan: port
3(wlan0) entered forwarding state
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.850000] br-lan: port
2(wlan1) entered forwarding state
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.850000] br-lan: port
2(wlan1) entered forwarding state
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.860000] IPv6:
ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Wed Oct 1 12:57:56 2014 kern.info kernel: [ 25.890000] IPv6:
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Oct 1 12:57:57 2014 daemon.notice netifd: Network device 'wlan1' link
is up
Wed Oct 1 12:57:57 2014 daemon.notice netifd: Network device 'wlan0' link
is up
Wed Oct 1 12:57:57 2014 daemon.notice netifd: wan (808): Sending
discover...
Wed Oct 1 12:57:58 2014 kern.info kernel: [ 27.780000] br-lan: port
3(wlan0) entered forwarding state
Wed Oct 1 12:57:58 2014 kern.info kernel: [ 27.850000] br-lan: port
2(wlan1) entered forwarding state
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq[974]: started, version 2.71
cachesize 150
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq[974]: compile time options:
IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-
conntrack no-ipset no-auth no-DNSSEC
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq-dhcp[974]: DHCP, IP range
192.168.1.100 -- 192.168.1.249, lease time 12h
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq[974]: using local addresses
only for domain lan
Wed Oct 1 12:57:59 2014 daemon.warn dnsmasq[974]: no servers found in
/tmp/resolv.conf.auto, will retry
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq[974]: read /etc/hosts - 1
addresses
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq[974]: read /tmp/hosts/dhcp -
1 addresses
Wed Oct 1 12:57:59 2014 daemon.info dnsmasq-dhcp[974]: read /etc/ethers -
0 addresses
Wed Oct 1 12:58:00 2014 daemon.notice netifd: wan (808): Sending
discover...
Wed Oct 1 12:58:03 2014 daemon.info dnsmasq-dhcp[974]: DHCPDISCOVER(br-
lan) 00:25:bc:dd:4e:ce
Wed Oct 1 12:58:03 2014 daemon.info dnsmasq-dhcp[974]: DHCPOFFER(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 12:58:03 2014 daemon.info dnsmasq-dhcp[974]: DHCPDISCOVER(br-
lan) 00:25:bc:dd:4e:ce
Wed Oct 1 12:58:03 2014 daemon.info dnsmasq-dhcp[974]: DHCPOFFER(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 12:58:04 2014 daemon.info dnsmasq-dhcp[974]: DHCPREQUEST(br-
lan) 192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 12:58:04 2014 daemon.info dnsmasq-dhcp[974]: DHCPACK(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce EC1840
Wed Oct 1 13:07:54 2014 daemon.info dnsmasq-dhcp[974]: DHCPDISCOVER(br-
lan) 00:25:bc:dd:4e:ce
Wed Oct 1 13:07:54 2014 daemon.info dnsmasq-dhcp[974]: DHCPOFFER(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 13:07:56 2014 daemon.info dnsmasq-dhcp[974]: DHCPDISCOVER(br-
lan) 00:25:bc:dd:4e:ce
Wed Oct 1 13:07:56 2014 daemon.info dnsmasq-dhcp[974]: DHCPOFFER(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 13:07:57 2014 daemon.info dnsmasq-dhcp[974]: DHCPREQUEST(br-
lan) 192.168.1.178 00:25:bc:dd:4e:ce
Wed Oct 1 13:07:57 2014 daemon.info dnsmasq-dhcp[974]: DHCPACK(br-lan)
192.168.1.178 00:25:bc:dd:4e:ce EC1840
Kernel Log:
[ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 14:56:26 CEST 2014
[ 0.000000] CPU revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package
0x0A
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id
0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C,
rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
[ 0.000000] bcma: bus0: Found serial flash
[ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB,
blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] MIPS: machine is Unknown Board
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802d0b80, node_mem_map
81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 16256
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61532k/65536k available (2373k kernel code, 4004k
reserved, 588k data, 168k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] Setting up vectored interrupts
[ 0.060000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 512
[ 0.070000] NET: Registered protocol family 16
[ 0.090000] bio: create slab <bio-0> at 0
[ 0.090000] Switching to clocksource MIPS
[ 0.100000] NET: Registered protocol family 2
[ 0.100000] TCP established hash table entries: 512 (order: 0, 4096
bytes)
[ 0.100000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.100000] TCP: Hash tables configured (established 512 bind 512)
[ 0.100000] TCP: reno registered
[ 0.100000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.100000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.100000] NET: Registered protocol family 1
[ 0.100000] PCI: CLS 0 bytes, default 32
[ 0.100000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
0x812, rev 0x11, class 0x0)
[ 0.100000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D,
rev 0x00, class 0x0)
[ 0.100000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id
0x819, rev 0x04, class 0x0)
[ 0.100000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev
0x0E, class 0x0)
[ 0.100000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller
(manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.100000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id
0x80E, rev 0x07, class 0x0)
[ 0.100000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev
0x00, class 0x0)
[ 0.150000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.150000] bcma: bus0: PMU resource config unknown or not needed for
device 0x4716
[ 0.150000] bcma: bus0: Workarounds unknown or not needed for device
0x4716
[ 0.150000] bcma: bus0: Initializing MIPS core...
[ 0.150000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[ 0.150000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[ 0.150000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[ 0.150000] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
[ 0.150000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[ 0.150000] bcma: bus0: set_irq: core 0x0834, irq 2 => 2
[ 0.150000] bcma: bus0: IRQ reconfiguration done
[ 0.150000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I
[ 0.150000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I*
[ 0.150000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I
[ 0.150000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I
[ 0.150000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I
[ 0.150000] bcma: core 0x0820, irq : 2(S) 3 4 5 6* D I
[ 0.150000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I
[ 0.150000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I*
[ 0.150000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I
[ 0.150000] bcma: bus0: PCIEcore in host mode found
[ 0.330000] PCI host bridge to bus 0000:00
[ 0.330000] pci_bus 0000:00: root bus resource [mem
0x08000000-0x0bffffff]
[ 0.330000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.330000] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.330000] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000
[ 0.330000] bcma: PCI: Fixing up bridge 0000:00:00.0
[ 0.330000] bcma: PCI: Fixing up device 0000:00:00.0
[ 0.330000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.330000] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x07ffffff 64bit]
[ 0.330000] pci 0000:00:00.0: supports D1 D2
[ 0.330000] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000
[ 0.330000] bcma: PCI: Fixing up bridge 0000:00:00.1
[ 0.330000] bcma: PCI: Fixing up device 0000:00:00.1
[ 0.330000] pci 0000:00:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.330000] pci 0000:00:00.1: reg 18: [mem 0x00000000-0x07ffffff 64bit]
[ 0.330000] pci 0000:00:00.1: supports D1 D2
[ 0.330000] pci 0000:00:01.0: [14e4:4331] type 00 class 0x028000
[ 0.330000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.330000] bcma: PCI: Fixing up addresses 0000:00:01.0
[ 0.330000] pci 0000:00:01.0: BAR 0: assigned [mem
0x08000000-0x08003fff 64bit]
[ 0.330000] pci 0000:00:01.0: supports D1 D2
[ 0.330000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.330000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[ 0.330000] bcma: PCI: Fixing up device 0000:00:01.0
[ 0.330000] bcma: change PCIe max read request size from 512 to 128
[ 0.330000] bcma: bus1: Found chip with id 0x4331, rev 0x02 and package
0x08
[ 0.330000] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id
0x800, rev 0x25, class 0x0)
[ 0.330000] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id
0x812, rev 0x1D, class 0x0)
[ 0.330000] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev
0x13, class 0x0)
[ 0.330000] bcma: bus1: Found rev 10 PMU (capabilities 0x108C260A)
[ 0.330000] bcma: bus1: SPROM offset 0x800
[ 0.420000] bcma: bus1: Invalid SPROM read from the PCIe card, trying
to use fallback SPROM
[ 0.440000] bcma: bus1: Using SPROM revision 9 provided by platform.
[ 0.440000] bcma: bus1: PMU resource config unknown or not needed for
device 0x4331
[ 0.450000] bcma: bus1: Bus registered
[ 0.460000] bcma: bus0: Bus registered
[ 0.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.460000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.460000] msgmni has been set to 120
[ 0.460000] io scheduler noop registered
[ 0.460000] io scheduler deadline registered (default)
[ 0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.490000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a
U6_16550A
[ 0.970000] console [ttyS0] enabled
[ 1.080000] 7 bcm47xxpart partitions found on MTD device bcm47xxsflash
[ 1.090000] Creating 7 MTD partitions on "bcm47xxsflash":
[ 1.100000] 0x000000000000-0x000000040000 : "boot"
[ 1.100000] 0x000000040000-0x0000007e0000 : "firmware"
[ 1.110000] 0x00000004001c-0x00000004090c : "loader"
[ 1.120000] 0x00000004090c-0x00000014d000 : "linux"
[ 1.120000] mtd: partition "linux" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[ 1.140000] 0x00000014d000-0x0000007e0000 : "rootfs"
[ 1.140000] mtd: partition "rootfs" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[ 1.160000] mtd: device 4 (rootfs) set to be root filesystem
[ 1.170000] mtd: partition "rootfs_data" created automatically,
ofs=0x360000, len=0x480000
[ 1.170000] 0x000000360000-0x0000007e0000 : "rootfs_data"
[ 1.180000] 0x0000007e0000-0x0000007f0000 : "board_data"
[ 1.190000] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.200000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
[ 1.210000] bgmac bcma0:1: Support for Roboswitch not implemented
[ 1.220000] libphy: bgmac mii bus: probed
[ 1.300000] b53_common: found switch: BCM53115, rev 8
[ 1.310000] bgmac: Broadcom 47xx GBit MAC driver loaded
[ 1.310000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled
(30 seconds)
[ 1.320000] TCP: cubic registered
[ 1.330000] NET: Registered protocol family 17
[ 1.330000] Bridge firewalling registered
[ 1.330000] 8021q: 802.1Q VLAN Support v1.8
[ 1.350000] VFS: Mounted root (squashfs filesystem) readonly on device
31:4.
[ 1.360000] Freeing unused kernel memory: 168K (802e6000 - 80310000)
[ 6.340000] libphy: bgmac-0-0:1e - Link is Up - 1000/Full
[ 8.070000] jffs2: notice: (231) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 2 of xdatum (0 unchecked, 1 orphan) and 20 of
xref (0 dead, 12 orphan) found.
[ 11.830000] NET: Registered protocol family 10
[ 11.850000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 11.860000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.880000] Loading modules backported from Linux version
master-2014-05-22-0-gf2032ea
[ 11.890000] Backport generated by backports.git
backports-20140320-37-g5c33da0
[ 11.900000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.960000] xt_time: kernel timezone is -0000
[ 12.000000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.000000] cfg80211: World regulatory domain updated:
[ 12.010000] cfg80211: DFS Master region: unset
[ 12.010000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 12.020000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 12.030000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 12.040000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 12.050000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A,
2000 mBm), (N/A)
[ 12.060000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 12.060000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 12.070000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 12.080000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 12.170000] PPP generic driver version 2.4.2
[ 12.180000] NET: Registered protocol family 24
[ 12.210000] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
[ 12.210000] bcma: bus1: Switched to core: 0x812
[ 12.210000] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
[ 12.220000] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0,
Version 1
[ 12.230000] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 12.230000] b43-phy1: Broadcom 4716 WLAN found (core revision 17)
[ 12.310000] b43-phy1: Found PHY: Analog 8, Type 4 (N), Revision 5
[ 12.320000] b43-phy1: Found Radio: Manuf 0x17F, ID 0x2056, Revision 7,
Version 0
[ 12.330000] Broadcom 43xx driver loaded [ Features: NL ]
[ 12.450000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 12.520000] ieee80211 phy1: Selected rate control algorithm
'minstrel_ht'
[ 18.070000] libphy: bgmac-0-0:1e - Link is Up - 1000/Full
[ 22.270000] device eth0.1 entered promiscuous mode
[ 22.280000] device eth0 entered promiscuous mode
[ 22.280000] br-lan: port 1(eth0.1) entered forwarding state
[ 22.290000] br-lan: port 1(eth0.1) entered forwarding state
[ 23.330000] libphy: bgmac-0-0:1e - Link is Up - 1000/Full
[ 24.290000] br-lan: port 1(eth0.1) entered forwarding state
[ 24.970000] b43-phy1: Loading firmware version 666.2 (2011-02-23
01:15:07)
[ 25.460000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 25.470000] device wlan1 entered promiscuous mode
[ 25.640000] b43-phy0: Loading firmware version 666.2 (2011-02-23
01:15:07)
[ 25.760000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.770000] device wlan0 entered promiscuous mode
[ 25.770000] br-lan: port 3(wlan0) entered forwarding state
[ 25.780000] br-lan: port 3(wlan0) entered forwarding state
[ 25.850000] br-lan: port 2(wlan1) entered forwarding state
[ 25.850000] br-lan: port 2(wlan1) entered forwarding state
[ 25.860000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 25.890000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.780000] br-lan: port 3(wlan0) entered forwarding state
[ 27.850000] br-lan: port 2(wlan1) entered forwarding state
--
Ticket URL: <https://dev.openwrt.org/ticket/18059>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
