#16543: luci wifi configuration broken with 2 or more radios
--------------------------+----------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+----------------------------------
Comment (by anonymous):
WR703N (BB 14_07) with WNDA3200 and TL-WDN3200 (rt2800usb) (both dual
band)
In UCI to radio0 is assigned internal WiFi for radio1 is assigned USB WiFi
stick (output of uci show wireless below comment)
When I use WNDA3200 everything works ok and settings are applayed to
correct radios.
When I use TL-WDN3200 in LUCI Wireless Overview for radio0 is: Generic
MAC80211 802.11abgn (radio0) which isn't true because internal radio is
only "bgn".
When I get into radio0 settings bookmark I can select 5GHz channel if I
save this settings it will be write to UCI (radio0) and applied to
internal radio - as a result internal radio will stop working.
Bellow are also output of iwinfo and informations from LUCI with TL-
WDN3200 connected.
From iwinfo phy0 is assigned to USB wifi and phy1 to internal radio (when
I use other WiFi sticks internal radio is always phy0)
It look like LUCI assume that radio0 is phy0 which is not true in that
case.
Output of uci show wireless:
wireless.radio0=wifi-device
wireless.radio0.type=mac80211
wireless.radio0.hwmode=11g
wireless.radio0.path=platform/ar933x_wmac
wireless.radio0.txpower=18
wireless.radio0.htmode=HT40
wireless.radio0.country=GB
wireless.radio0.channel=13
wireless.radio1=wifi-device
wireless.radio1.type=mac80211
wireless.radio1.path=platform/ehci-platform/usb1/*/*/*
wireless.radio1.htmode=HT40
wireless.radio1.country=GB
wireless.radio1.channel=1
wireless.radio1.hwmode=11g
wireless.radio1.txpower=10
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device=radio0
wireless.@wifi-iface[0].mode=ap
wireless.@wifi-iface[0].ssid=wr703n
wireless.@wifi-iface[0].encryption=psk2+ccmp
wireless.@wifi-iface[0].key=*****
wireless.@wifi-iface[0].network=wlan
wireless.@wifi-iface[1]=wifi-iface
wireless.@wifi-iface[1].device=radio1
wireless.@wifi-iface[1].ssid=wr703n_monitor
wireless.@wifi-iface[1].mode=monitor
wireless.@wifi-iface[1].network=monitor
Output of iwinfo
wlan0 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Monitor Channel: 1 (2.412 GHz)
Tx-Power: 20 dBm Link Quality: unknown/70
Signal: unknown Noise: unknown
Bit Rate: unknown
Encryption: unknown
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan1 ESSID: "wr703n"
Access Point: 0C:82:68:D5:0B:30
Mode: Master Channel: 13 (2.472 GHz)
Tx-Power: 18 dBm Link Quality: 56/70
Signal: -54 dBm Noise: -93 dBm
Bit Rate: 72.2 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11bgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy1
LUCI information:
Wireless Overview
Generic MAC80211 802.11abgn (radio0)
SSID: wr703n | Mode: Master
Generic MAC80211 802.11bgn (radio1)
SSID: wr703n_monitor | Mode: Monitor
WiFi network bookmarks:
radio0: Master "wr703n"
Wireless Network: Master "wr703n" (wlan1)
Status
Mode: Master | SSID: wr703n
BSSID: 0C:82:68:D5:0B:30 | Encryption: WPA2 PSK (CCMP)
Channel: 13 (2.472 GHz) | Tx-Power: 18 dBm
Signal: -52 dBm | Noise: -93 dBm
Bitrate: 72.2 Mbit/s | Country: GB
Channel 13
Transmit Power 18dBm
radio1: Monitor "wr703n_monitor"
Wireless Network: Monitor "wr703n_monitor" (wlan0)
Status
SSID: wr703n_monitor | Mode: Monitor
Wireless is disabled or not associated
Wireless network is enabled
Channel 1
Transmit Power 10dBm
--
Ticket URL: <https://dev.openwrt.org/ticket/16543#comment:1>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
