#13004: reboot hang on x86 PC engines WRAP platform
---------------------------+--------------------------------------------
Reporter: osovskij.k@… | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker 14.07
Component: kernel | Version: Trunk
Resolution: | Keywords: x86 PCEngines wrap reboot hang
---------------------------+--------------------------------------------
Comment (by microstart):
Replying to [comment:39 microstart]:
> Replying to [comment:38 sturgillbd]:
> > I use madwifi for the atheros cards. You seem to be using ath5k. With
Ath5k you have to use hostapd to set up the AP. According to your logs,
your card may have a problem though. Have you tested both cards ie. tried
one at a time and both work?
>
> I've just tried one at a time, and both worked one after another.
> Then again I put them together and now it seems the board is detecting
both properly, as you can see below.
> Is the madwifi better than ath5k?
Yes, you were right - the AP mode with ath5k is really difficul. I can't
get an idea how to use hostapd. In addition I installed some new kind of
luci, and everything is a bit ... newer. Is it safe to change the wifi
driver, and can I use the stock one from the repository, since I'm with
your custom build?
> [ 9.501500] ath5k 0000:00:0d.0: registered as 'phy0'
> [ 10.034126] ath: EEPROM regdomain: 0x0
> [ 10.034170] ath: EEPROM indicates default country code should be used
> [ 10.034210] ath: doing EEPROM country->regdmn map search
> [ 10.034264] ath: country maps to regdmn code: 0x3a
> [ 10.034303] ath: Country alpha2 being used: US
> [ 10.034337] ath: Regpair used: 0x3a
> [ 10.035997] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
> [ 10.040305] ath5k: phy0: Atheros AR5213A chip found (MAC: 0x59, PHY:
0x43)
> [ 10.061197] ath5k: phy0: RF5112B multiband radio found (0x36)
> [ 10.079560] ath5k 0000:00:11.0: registered as 'phy1'
> [ 10.094938] cfg80211: Calling CRDA for country: US
> [ 10.110196] cfg80211: Regulatory domain changed to country: US
> [ 10.127964] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
> [ 10.152814] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2700 mBm)
> [ 10.176362] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 1700 mBm)
> [ 10.199893] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
> [ 10.223424] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
> [ 10.246952] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
> [ 10.270483] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 3000 mBm)
> [ 11.060855] ath: EEPROM regdomain: 0x0
> [ 11.060898] ath: EEPROM indicates default country code should be used
> [ 11.060937] ath: doing EEPROM country->regdmn map search
> [ 11.060991] ath: country maps to regdmn code: 0x3a
> [ 11.061028] ath: Country alpha2 being used: US
> [ 11.061062] ath: Regpair used: 0x3a
> [ 11.062623] ieee80211 phy1: Selected rate control algorithm
'minstrel_ht'
> [ 11.066504] ath5k: phy1: Atheros AR5414 chip found (MAC: 0xa5, PHY:
0x61)
--
Ticket URL: <https://dev.openwrt.org/ticket/13004#comment:40>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
