#18261: TL-WR1043ND v1 - VLAN is broken when only assigned to tagged ports.
------------------------------+-----------------------------------
Reporter: alejandro_liu@… | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: kernel | Version: Barrier Breaker 14.07
Resolution: | Keywords:
------------------------------+-----------------------------------
Comment (by alejandro_liu@…):
I would like to add more details on this.
I am using a TL-WR1043ND v1. On port 0 I connect to another router. I
had VLAN3 and VLAN4 running on it (both tagged). That did not work. I
was not able to ping from the other router the TL-WR1043ND VLAN4 address.
So what I did is added VLAN4 to port 1 (untagged), removing VLAN3 for port
1, and that made VLAN4 working again. The TL-WR1043ND, would answer to
pings.
If I on the other hand, went and make port 1 tagged, then that made VLAN4
stop working. Pings are ignored.
In all this, the other router configuration did not change at all. The
only thing that changes is port 1 tagged/untagged status. If port 1 is
tagged, VLAN4 does not work. If port 1 is untagged, VLAN4 works.
Looks like VLAN configuration only gets apply for VLANs that have untagged
ports. If all the ports on that VLAN are tagged, it does not work.
I had a similar configuration with Backfire (10.03/10.03.1) which would
work. Starting with Attitude Adjustment (12.09) it seem to have stopped
working.
--
Ticket URL: <https://dev.openwrt.org/ticket/18261#comment:1>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
