#17364: Tp-Link WR1043ND v2 wifi hangs
---------------------------+------------------------------------
Reporter: mbielowicz@… | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Chaos Calmer (trunk)
Component: packages | Version: Trunk
Resolution: | Keywords: wr1043nd v2 wifi issue
---------------------------+------------------------------------
Comment (by anonymous):
Wifi doesn't start in r43350:
'''netifd warning:'''
{{{
Sun Nov 23 22:08:23 2014 kern.info kernel: [ 311.870000] eth0: link up
(1000Mbps/Full duplex)
Sun Nov 23 22:08:23 2014 kern.info kernel: [ 311.880000] IPv6:
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sun Nov 23 22:08:23 2014 daemon.notice netifd: Network device 'eth0' link
is up
Sun Nov 23 22:08:23 2014 daemon.notice netifd: Interface 'wan' has link
connectivity
Sun Nov 23 22:08:36 2014 daemon.warn pppd[2299]: Timeout waiting for PADO
packets
Sun Nov 23 22:08:36 2014 daemon.err pppd[2299]: Unable to complete PPPoE
Discovery
Sun Nov 23 22:08:36 2014 daemon.info pppd[2299]: Exit.
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Interface 'wan' is now down
Sun Nov 23 22:08:36 2014 kern.info kernel: [ 325.480000] eth0: link down
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Interface 'wan' is disabled
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Interface 'wan' is enabled
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Interface 'wan' is setting
up now
Sun Nov 23 22:08:36 2014 kern.info kernel: [ 325.490000] IPv6:
ADDRCONF(NETDEV_UP): eth0: link is not ready
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Network device 'eth0' link
is down
Sun Nov 23 22:08:36 2014 daemon.notice netifd: Interface 'wan' has link
connectivity loss
Sun Nov 23 22:08:36 2014 daemon.info pppd[2314]: Plugin rp-pppoe.so
loaded.
Sun Nov 23 22:08:36 2014 daemon.info pppd[2314]: RP-PPPoE plugin version
3.8p compiled against pppd 2.4.7
Sun Nov 23 22:08:36 2014 daemon.notice pppd[2314]: pppd 2.4.7 started by
root, uid 0
Sun Nov 23 22:08:38 2014 kern.info kernel: [ 326.880000] eth0: link up
(1000Mbps/Full duplex)
Sun Nov 23 22:08:38 2014 kern.info kernel: [ 326.890000] IPv6:
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sun Nov 23 22:08:38 2014 daemon.notice netifd: Network device 'eth0' link
is up
Sun Nov 23 22:08:38 2014 daemon.notice netifd: Interface 'wan' has link
connectivity
Sun Nov 23 22:08:41 2014 daemon.notice netifd: radio0 (2338): WARNING:
Variable 'config' does not exist or is not an array/object
Sun Nov 23 22:08:41 2014 daemon.notice netifd: radio0 (2338): WARNING:
Variable 'interfaces' does not exist or is not an array/object
Sun Nov 23 22:08:41 2014 daemon.notice netifd: radio0 (2338): WARNING:
Variable 'interfaces' does not exist or is not an array/object
Sun Nov 23 22:08:41 2014 daemon.notice netifd: radio0 (2338): WARNING:
Variable 'interfaces' does not exist or is not an array/object
}}}
'''/var/run/hostapd-phy0.conf is truncated:'''
{{{
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
hw_mode=g
channel=11
}}}
'''dmesg:'''
{{{
BusyBox v1.22.1 (2014-11-23 22:02:09 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
CHAOS CALMER (Bleeding Edge, r43350)
-----------------------------------------------------
* 1 1/2 oz Gin Shake with a glassful
* 1/4 oz Triple Sec of broken ice and pour
* 3/4 oz Lime Juice unstrained into a goblet.
* 1 1/2 oz Orange Juice
* 1 tsp. Grenadine Syrup
-----------------------------------------------------
root@WR1043NDv2:~# dmesg
[ 0.000000] Linux version 3.14.18 (michal@debian) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.04 r43174) ) #1 Sun Nov 23 22:08:36 CET 2014
[ 0.000000] MyLoader: sysp=bded2d2f, boardp=f5402981, parts=77f505a3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9558 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80338420, node_mem_map
81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WR1043ND-v2
console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61076K/65536K available (2379K kernel code, 119K
rwdata, 500K rodata, 256K init, 187K bss, 4460K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz,
Ref:40.000MHz
[ 0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.060000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.070000] NET: Registered protocol family 16
[ 0.080000] MIPS: machine is TP-LINK TL-WR1043ND v2
[ 0.490000] bio: create slab <bio-0> at 0
[ 0.500000] Switched to clocksource MIPS
[ 0.510000] NET: Registered protocol family 2
[ 0.510000] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.510000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.520000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.530000] TCP: reno registered
[ 0.530000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.530000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.540000] NET: Registered protocol family 1
[ 0.540000] PCI: CLS 0 bytes, default 32
[ 0.550000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.570000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.570000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.580000] msgmni has been set to 119
[ 0.590000] io scheduler noop registered
[ 0.590000] io scheduler deadline registered (default)
[ 0.600000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.620000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud
= 2500000) is a 16550A
[ 0.630000] console [ttyS0] enabled
[ 0.640000] bootconsole [early0] disabled
[ 0.650000] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.650000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.660000] 5 tp-link partitions found on MTD device spi0.0
[ 0.670000] Creating 5 MTD partitions on "spi0.0":
[ 0.670000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.680000] 0x000000020000-0x00000012e5fc : "kernel"
[ 0.680000] mtd: partition "kernel" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[ 0.700000] 0x00000012e5fc-0x0000007f0000 : "rootfs"
[ 0.700000] mtd: partition "rootfs" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[ 0.720000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.720000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.730000] 0x000000530000-0x0000007f0000 : "rootfs_data"
[ 0.730000] 0x0000007f0000-0x000000800000 : "art"
[ 0.740000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.780000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-
mdio.0
[ 1.030000] libphy: ag71xx_mdio: probed
[ 1.670000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00
[uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 1.680000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 2.230000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
[ 2.240000] TCP: cubic registered
[ 2.250000] NET: Registered protocol family 17
[ 2.250000] 8021q: 802.1Q VLAN Support v1.8
[ 2.260000] VFS: Mounted root (squashfs filesystem) readonly on device
31:2.
[ 2.270000] Freeing unused kernel memory: 256K (80350000 - 80390000)
[ 5.190000] usbcore: registered new interface driver usbfs
[ 5.200000] usbcore: registered new interface driver hub
[ 5.200000] usbcore: registered new device driver usb
[ 5.240000] SCSI subsystem initialized
[ 5.250000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.260000] ehci-platform: EHCI generic platform driver
[ 5.270000] ehci-platform ehci-platform.0: EHCI Host Controller
[ 5.270000] ehci-platform ehci-platform.0: new USB bus registered,
assigned bus number 1
[ 5.280000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
[ 5.290000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[ 5.320000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 5.320000] hub 1-0:1.0: USB hub found
[ 5.330000] hub 1-0:1.0: 1 port detected
[ 5.330000] ehci-platform ehci-platform.1: EHCI Host Controller
[ 5.340000] ehci-platform ehci-platform.1: new USB bus registered,
assigned bus number 2
[ 5.350000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
[ 5.350000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[ 5.380000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
[ 5.380000] hub 2-0:1.0: USB hub found
[ 5.390000] hub 2-0:1.0: 1 port detected
[ 5.390000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.400000] ohci-platform: OHCI generic platform driver
[ 5.410000] usbcore: registered new interface driver usb-storage
[ 6.870000] eth1: link up (1000Mbps/Full duplex)
[ 6.910000] random: mktemp urandom read with 63 bits of entropy
available
[ 10.150000] jffs2: notice: (379) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 18 of
xref (0 dead, 2 orphan) found.
[ 10.180000] eth1: link down
[ 12.780000] NET: Registered protocol family 10
[ 12.800000] tun: Universal TUN/TAP device driver, 1.6
[ 12.810000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 12.830000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.860000] batman_adv: B.A.T.M.A.N. advanced 2014.3.0 (compatibility
version 15) loaded
[ 12.900000] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.920000] u32 classifier
[ 12.930000] input device check on
[ 12.930000] Actions configured
[ 12.940000] Mirror/redirect action on
[ 12.960000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
[ 13.190000] Loading modules backported from Linux version
master-2014-11-04-0-gf3660a2
[ 13.200000] Backport generated by backports.git
backports-20141023-2-g4ff890b
[ 13.210000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.240000] usbcore: registered new interface driver ums-alauda
[ 13.250000] usbcore: registered new interface driver ums-cypress
[ 13.250000] usbcore: registered new interface driver ums-datafab
[ 13.260000] usbcore: registered new interface driver ums-freecom
[ 13.280000] usbcore: registered new interface driver ums-isd200
[ 13.300000] usbcore: registered new interface driver ums-jumpshot
[ 13.300000] usbcore: registered new interface driver ums-karma
[ 13.320000] usbcore: registered new interface driver ums-sddr09
[ 13.330000] usbcore: registered new interface driver ums-sddr55
[ 13.330000] usbcore: registered new interface driver ums-usbat
[ 13.370000] usbcore: registered new interface driver usbserial
[ 13.370000] usbcore: registered new interface driver usbserial_generic
[ 13.380000] usbserial: USB Serial support registered for generic
[ 13.470000] xt_time: kernel timezone is -0000
[ 13.510000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.510000] cfg80211: World regulatory domain updated:
[ 13.520000] cfg80211: DFS Master region: unset
[ 13.520000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.540000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.550000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.560000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.570000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 13.570000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 13.580000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.590000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 13.670000] PPP generic driver version 2.4.2
[ 13.670000] NET: Registered protocol family 24
[ 13.760000] ath: EEPROM regdomain: 0x0
[ 13.760000] ath: EEPROM indicates default country code should be used
[ 13.760000] ath: doing EEPROM country->regdmn map search
[ 13.760000] ath: country maps to regdmn code: 0x3a
[ 13.760000] ath: Country alpha2 being used: US
[ 13.760000] ath: Regpair used: 0x3a
[ 13.780000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 13.780000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
[ 13.790000] cfg80211: Calling CRDA for country: US
[ 13.790000] cfg80211: Regulatory domain changed to country: US
[ 13.800000] cfg80211: DFS Master region: FCC
[ 13.800000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.810000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
3000 mBm), (N/A)
[ 13.820000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
1700 mBm), (N/A)
[ 13.830000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
2300 mBm), (0 s)
[ 13.840000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
3000 mBm), (N/A)
[ 13.850000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 19.230000] eth1: link up (1000Mbps/Full duplex)
[ 19.230000] device eth1 entered promiscuous mode
[ 19.250000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.290000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.230000] br-lan: port 1(eth1) entered forwarding state
[ 20.230000] br-lan: port 1(eth1) entered forwarding state
[ 20.240000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 20.310000] random: nonblocking pool is initialized
[ 20.580000] cfg80211: Calling CRDA for country: PL
[ 20.590000] cfg80211: Regulatory domain changed to country: PL
[ 20.590000] cfg80211: DFS Master region: ETSI
[ 20.600000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 20.610000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 20.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 20.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A,
2000 mBm), (0 s)
[ 20.630000] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A,
2700 mBm), (0 s)
[ 20.640000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 20.880000] eth0: link up (1000Mbps/Full duplex)
[ 20.910000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.230000] br-lan: port 1(eth1) entered forwarding state
[ 36.820000] eth0: link down
[ 36.830000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.380000] eth0: link up (1000Mbps/Full duplex)
[ 38.390000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.020000] eth0: link down
[ 52.030000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.390000] eth0: link up (1000Mbps/Full duplex)
[ 53.400000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 67.220000] eth0: link down
[ 67.230000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.400000] eth0: link up (1000Mbps/Full duplex)
[ 68.410000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 82.420000] eth0: link down
[ 82.420000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 84.410000] eth0: link up (1000Mbps/Full duplex)
[ 84.420000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 97.610000] eth0: link down
[ 97.610000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 99.420000] eth0: link up (1000Mbps/Full duplex)
[ 99.430000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.800000] eth0: link down
[ 112.800000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 114.430000] eth0: link up (1000Mbps/Full duplex)
[ 114.440000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 128.000000] eth0: link down
[ 128.000000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 129.440000] eth0: link up (1000Mbps/Full duplex)
[ 129.450000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 143.190000] eth0: link down
[ 143.190000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 144.520000] eth0: link up (1000Mbps/Full duplex)
[ 144.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 158.380000] eth0: link down
[ 158.380000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 160.220000] eth0: link up (1000Mbps/Full duplex)
[ 160.230000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 173.560000] eth0: link down
[ 173.560000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 175.230000] eth0: link up (1000Mbps/Full duplex)
[ 175.240000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 188.740000] eth0: link down
[ 188.750000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.240000] eth0: link up (1000Mbps/Full duplex)
[ 190.250000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 203.930000] eth0: link down
[ 203.930000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 205.250000] eth0: link up (1000Mbps/Full duplex)
[ 205.260000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 219.110000] eth0: link down
[ 219.120000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 220.260000] eth0: link up (1000Mbps/Full duplex)
[ 220.270000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 234.320000] eth0: link down
[ 234.320000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 235.820000] eth0: link up (1000Mbps/Full duplex)
[ 235.830000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 249.520000] eth0: link down
[ 249.530000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 250.830000] eth0: link up (1000Mbps/Full duplex)
[ 250.840000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 264.720000] eth0: link down
[ 264.720000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 265.840000] eth0: link up (1000Mbps/Full duplex)
[ 265.850000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 279.900000] eth0: link down
[ 279.910000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 281.850000] eth0: link up (1000Mbps/Full duplex)
[ 281.860000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 295.090000] eth0: link down
[ 295.100000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 296.860000] eth0: link up (1000Mbps/Full duplex)
[ 296.870000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 310.280000] eth0: link down
[ 310.290000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 311.870000] eth0: link up (1000Mbps/Full duplex)
[ 311.880000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 325.480000] eth0: link down
[ 325.490000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 326.880000] eth0: link up (1000Mbps/Full duplex)
[ 326.890000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 340.670000] eth0: link down
[ 340.680000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 341.950000] eth0: link up (1000Mbps/Full duplex)
[ 341.960000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 355.860000] eth0: link down
[ 355.870000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 357.650000] eth0: link up (1000Mbps/Full duplex)
[ 357.660000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 371.050000] eth0: link down
[ 371.060000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 372.660000] eth0: link up (1000Mbps/Full duplex)
[ 372.670000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 386.240000] eth0: link down
[ 386.240000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 387.670000] eth0: link up (1000Mbps/Full duplex)
[ 387.680000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 401.420000] eth0: link down
[ 401.430000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 402.680000] eth0: link up (1000Mbps/Full duplex)
[ 402.690000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 416.620000] eth0: link down
[ 416.620000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 417.690000] eth0: link up (1000Mbps/Full duplex)
[ 417.700000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 431.800000] eth0: link down
[ 431.810000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 433.250000] eth0: link up (1000Mbps/Full duplex)
[ 433.260000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 446.990000] eth0: link down
[ 447.000000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 448.260000] eth0: link up (1000Mbps/Full duplex)
[ 448.270000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 462.180000] eth0: link down
[ 462.190000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 463.270000] eth0: link up (1000Mbps/Full duplex)
[ 463.280000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 477.370000] eth0: link down
[ 477.370000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 479.280000] eth0: link up (1000Mbps/Full duplex)
[ 479.290000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 492.550000] eth0: link down
[ 492.560000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 494.290000] eth0: link up (1000Mbps/Full duplex)
[ 494.300000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 507.740000] eth0: link down
[ 507.750000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 509.300000] eth0: link up (1000Mbps/Full duplex)
[ 509.310000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 522.950000] eth0: link down
[ 522.960000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 524.310000] eth0: link up (1000Mbps/Full duplex)
[ 524.320000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 538.140000] eth0: link down
[ 538.140000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 539.390000] eth0: link up (1000Mbps/Full duplex)
[ 539.400000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 553.320000] eth0: link down
[ 553.320000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 555.100000] eth0: link up (1000Mbps/Full duplex)
[ 555.110000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 568.500000] eth0: link down
[ 568.510000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 570.110000] eth0: link up (1000Mbps/Full duplex)
[ 570.120000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 583.700000] eth0: link down
[ 583.700000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 585.120000] eth0: link up (1000Mbps/Full duplex)
[ 585.130000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 598.880000] eth0: link down
[ 598.890000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 600.130000] eth0: link up (1000Mbps/Full duplex)
[ 600.140000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 614.070000] eth0: link down
[ 614.080000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 615.140000] eth0: link up (1000Mbps/Full duplex)
[ 615.150000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 629.260000] eth0: link down
[ 629.270000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 630.700000] eth0: link up (1000Mbps/Full duplex)
[ 630.710000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 644.450000] eth0: link down
[ 644.450000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 645.710000] eth0: link up (1000Mbps/Full duplex)
[ 645.720000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@WR1043NDv2:~#
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/17364#comment:13>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
