#18492: Clients can not associate with my AP on WL500GPv2 running broadcom-wl
driver
--------------------+-----------------------------------
Reporter: yarulf | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: kernel | Version: Barrier Breaker 14.07
Keywords: |
--------------------+-----------------------------------
Trying setup a BB with Broadcom-wl profile on asus wl500gpv2.
My /etc/config/wireless:
config wifi-device 'wl0'
option type 'broadcom'
option channel '1'
option txantenna '3'
option rxantenna '3'
option txpower '24'
option hwmode '11bg'
config wifi-iface
option device 'wl0'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'
ifconfig:
wl0 Link encap:Ethernet HWaddr 00:22:15:6A:F6:62
inet6 addr: fe80::222:15ff:fe6a:f662/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:43440
TX packets:6 errors:2 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:628 (628.0 B)
Interrupt:5 Base address:0x5000
Wireless is up and running. My devices can see 'OpenWrt' SSID but can not
associate. I did some packet monitoring on the router and client sides and
attach pcap-files - router-wl and client-wl.
--
Ticket URL: <https://dev.openwrt.org/ticket/18492>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
