#18975: ramips rev 44407 boot failed
------------------------+------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: highest | Milestone:
Component: kernel | Version: Trunk
Resolution: | Keywords:
------------------------+------------------------
Comment (by anonymous):
[ 0.440000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20,
base_baud = 2500000) is a 16550A
[ 0.440000] console [ttyS0] enabled
[ 0.440000] console [ttyS0] enabled
[ 0.440000] bootconsole [early0] disabled
[ 0.440000] bootconsole [early0] disabled
[ 0.440000] gsw: setting port4 to ephy mode
[ 0.740000] ralink_soc_eth 10100000.ethernet eth0 (uninitialized): port
0 link up (100Mbps/Full duplex)
[ 0.760000] ralink_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.780000] ralink_soc_eth 10100000.ethernet eth0: ralink at
0xb0100000, irq 5
[ 0.780000] rt2880_wdt 10000120.watchdog: Initialized
[ 0.800000] TCP: cubic registered
[ 0.800000] NET: Registered protocol family 17
[ 0.820000] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.840000] 8021q: 802.1Q VLAN Support v1.8
[ 0.850000] VFS: Cannot open root device "(null)" or unknown-
block(0,0): error -6
[ 0.870000] Please append a correct "root=" boot option; here are the
available partitions:
[ 0.890000] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[ 0.890000] ---[ end Kernel panic - not syncing: VFS: Unable to mount
root fs on unknown-block(0,0)
I have same problem, it must be kernel cannot found flash.
--
Ticket URL: <https://dev.openwrt.org/ticket/18975#comment:4>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
