#19141: bcm63xx:  CFE cannot detect BCM5325 switch after OpenWrt reboot.
-------------------------------------+------------------------
 Reporter:  dgcbueu@…                |      Owner:  developers
     Type:  defect                   |     Status:  new
 Priority:  lowest                   |  Milestone:
Component:  base system              |    Version:  Trunk
 Keywords:  bcm63xx  bcm5325 switch  |
-------------------------------------+------------------------
 OpenWrt installed in a bcm6348 board, (96348GW-11). The switch at this
 board is configured by CFE via SPI (well I think it is since the switch
 has the SPI pins wired, and board structure uses SPI SS1 in OEM firmware).
 All works OK in OpenWrt, ping OK.

 But when restarting OpenWrt (without unplugging the power cord), CFE can't
 configure the switch. But later when again OpenWrt is up, ping is OK.

 If i try break into CFE CLI I get this infinite loop:

 {{{

 Could not activate network interface 'eth0': CFE error -1
 *** Press any key to stop auto run (1 seconds) ***
 Auto run second count down: 1\0x081\0x081
 CFE>
 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J

 CFE>

 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J

 CFE>
 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J

 CFE>

 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J


 web error -1: Could not create TCP socket.\0x1b[J

 }}}


 If I power cycle the router, CFE is again able to manage the switch.

 I tried to add the switch as an SPI device to OpenWrt without success,
 same error.

--
Ticket URL: <https://dev.openwrt.org/ticket/19141>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to