#19498: Packet loss on ALFA Hornet-UB on one port
-----------------------+------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: packages | Version: Trunk
Keywords: |
-----------------------+------------------------
Tested current trunk and it seems I have some packet loss when sending a
lot of packets through on port but works fine on the other. I could not
find a single version were it worked.
I've added both eth1 and eth0 to br-lan. Then I've configured br-lan to be
in the network 192.168.178.0/24. The cable was attached to both ports (not
at the same time) and following commands were run
{{{
ping 192.168.178.123
ping -s 65507 192.168.178.123
}}}
The first one worked perfectly fine on both ports. The second one worked
fine on port eth1. BUT it didn't work on eth0. The receiving PC
(192.168.178.123) isn't receiving some of the fragments. He only replies
with an "ICMP Fragment reassembly time exceeded" packet.
The same happens when the device is pinged with the same commands. It
receives the fragments from the PC and starts to reply. But again, some of
the (reply) ICMP fragments are not received by the PC.
--
Ticket URL: <https://dev.openwrt.org/ticket/19498>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
