#19747: bitrate change problem with iw
----------------------+------------------------
Reporter: jpedro | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: packages | Version: Trunk
Keywords: ath9k |
----------------------+------------------------
Hi.
I've tested to change the bitrate with the command "iw wlan0 set bitrates
legacy-5 9" after I remove ACK's with 'iw wlan0 set noack_map 0x009', but
then when I use the ping/fping I receive the packets with a data rate of 6
Mbit/s. Besides, the only bitrates I can use are 6, 12 and 24 Mbit/s. I
can't change to 9 and 18 Mbit/s or higher than 24. When I change to 9, the
data is received at 6Mbit/s and when I set up to 18Mbit/s, the data is
received at 24.
I am using a Routerboard R52n-M in adhoc mode, with a channel bandwidth of
10MHz, no ACK's and rts equal to 2437.
Tested with version r44532, ath9k, 802.11a.
Thanks.
--
Ticket URL: <https://dev.openwrt.org/ticket/19747>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
