#19856: Lantiq ARV752DPW wifi broken
-----------------------+----------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: packages | Version: Trunk
Keywords: |
-----------------------+----------------------------------
Tested with CHAOS CALMER (15.05-rc2, r45918) from downloads.openwrt.org on
easybox 802.
AP never send any packets/beacons, and "iw dev wlan0 scan" causes
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
Configuration partition is ok wifi works flawless on barrier breaker.
{{{
[ 16.716000] cfg80211: Calling CRDA to update world regulatory domain
[ 16.720000] cfg80211: World regulatory domain updated:
[ 16.724000] cfg80211: DFS Master region: unset
[ 16.728000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.740000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.748000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.756000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.760000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.768000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.780000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 16.788000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.796000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 17.008000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[ 17.016000] rt2800pci 0000:00:0e.0: failed to load eeprom property
[ 17.020000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info -
Loading EEPROM data from 'RT2860.eeprom'.
[ 17.100000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev
0103 detected
[ 17.104000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001
detected
[ 17.112000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 36.556000] device eth0 entered promiscuous mode
[ 36.572000] br-lan: port 1(eth0) entered forwarding state
[ 36.576000] br-lan: port 1(eth0) entered forwarding state
[ 38.580000] br-lan: port 1(eth0) entered forwarding state
[ 39.832000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2860.bin'
[ 39.876000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.34
[ 39.928000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.960000] device wlan0 entered promiscuous mode
[ 39.996000] br-lan: port 2(wlan0) entered forwarding state
[ 40.000000] br-lan: port 2(wlan0) entered forwarding state
[ 40.004000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.004000] br-lan: port 2(wlan0) entered forwarding state
[ 134.420000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 134.584000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 143.160000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 143.324000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 148.512000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 148.676000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 171.884000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
[ 172.048000] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0
failed to flush
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/19856>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
