#19995: TP-LINK TD-W8970 switch problem
--------------------------+----------------------------------
Reporter: d.buffa@… | Owner: developers
Type: defect | Status: new
Priority: highest | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+----------------------------------
Comment (by d.buffa@…):
It happened now with build from last trunk
{{{
[ 0.000000] Linux version 3.18.16 ([email protected]) (gcc
version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46133) ) #1 Fri Jun 26
22:25:59 CEST 2015
[ 0.000000] SoC: VR9 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is TDW8970 - TP-LINK TD-W8970
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 8043c130, node_mem_map
81007ce0
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 16256
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
init=/etc/preinit
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.000000] Writing ErrCtl register=00069a30
[ 0.000000] Readback ErrCtl register=00069a30
[ 0.000000] Memory: 60068K/65536K available (3352K kernel code, 151K
rwdata, 936K rodata, 148K init, 205K bss, 5468K reserved)
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 500MHz
[ 0.028000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.044000] pinctrl core: initialized pinctrl subsystem
[ 0.048000] NET: Registered protocol family 16
[ 0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7,
channels: 28
[ 0.164000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.276000] ath9k,eeprom ath9k_eep: failed to load eeprom address
[ 0.300000] usbcore: registered new interface driver usbfs
[ 0.304000] usbcore: registered new interface driver hub
[ 0.308000] usbcore: registered new device driver usb
[ 0.312000] PCI host bridge to bus 0000:00
[ 0.316000] pci_bus 0000:00: root bus resource [mem
0x1c000000-0x1cffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [io
0x1d800000-0x1d8fffff]
[ 0.324000] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.328000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000
[ 0.328000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to
pci-pci bridge
[ 0.340000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.340000] pci 0000:01:00.0: [168c:abcd] type 00 class 0x020000
[ 0.340000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff
64bit]
[ 0.340000] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
pref]
[ 0.340000] pci 0000:01:00.0: supports D1
[ 0.340000] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.340000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.340000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.340000] pci 0000:00:00.0: BAR 8: assigned [mem
0x1c000000-0x1c0fffff]
[ 0.344000] pci 0000:00:00.0: BAR 9: assigned [mem
0x1c100000-0x1c1fffff pref]
[ 0.348000] pci 0000:01:00.0: BAR 0: assigned [mem
0x1c000000-0x1c01ffff 64bit]
[ 0.352000] pci 0000:01:00.0: BAR 6: assigned [mem
0x1c100000-0x1c10ffff pref]
[ 0.356000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.360000] pci 0000:00:00.0: bridge window [mem
0x1c000000-0x1c0fffff]
[ 0.364000] pci 0000:00:00.0: bridge window [mem
0x1c100000-0x1c1fffff pref]
[ 0.368000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 0.372000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 0.376000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 0.380000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 0.384000] Switched to clocksource MIPS
[ 0.388000] NET: Registered protocol family 2
[ 0.392000] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.400000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.408000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.412000] TCP: reno registered
[ 0.416000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.428000] NET: Registered protocol family 1
[ 0.432000] PCI: CLS 0 bytes, default 32
[ 0.432000] gptu: totally 6 16-bit timers/counters
[ 0.440000] gptu: misc_register on minor 63
[ 0.444000] gptu: succeeded to request irq 126
[ 0.448000] gptu: succeeded to request irq 127
[ 0.452000] gptu: succeeded to request irq 128
[ 0.456000] gptu: succeeded to request irq 129
[ 0.460000] gptu: succeeded to request irq 130
[ 0.464000] gptu: succeeded to request irq 131
[ 0.472000] phy-xrx200 gphy-xrx200: requesting
lantiq/vr9_phy11g_a2x.bin
[ 0.476000] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 3900000
[ 0.484000] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 3900000
[ 0.592000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.604000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.616000] msgmni has been set to 117
[ 0.620000] io scheduler noop registered
[ 0.624000] io scheduler deadline registered (default)
[ 0.628000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112,
base_baud = 0) is a lantiq,asc
[ 0.636000] console [ttyLTQ0] enabled
[ 0.644000] bootconsole [early0] disabled
[ 0.668000] m25p80 spi32766.0: found s25fl064k, expected en25q64
[ 0.676000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[ 0.680000] 5 ofpart partitions found on MTD device spi32766.0
[ 0.684000] Creating 5 MTD partitions on "spi32766.0":
[ 0.692000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.696000] 0x000000020000-0x0000006c0000 : "firmware"
[ 0.704000] 0x0000001994a4-0x0000006c0000 : "rootfs"
[ 0.708000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.716000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.720000] 0x000000520000-0x0000006c0000 : "rootfs_data"
[ 1.568000] 0x0000006c0000-0x0000007c0000 : "dsl_fw"
[ 1.572000] 0x0000007c0000-0x0000007d0000 : "config"
[ 1.576000] 0x0000007d0000-0x000000800000 : "boardconfig"
[ 1.684000] libphy: lantiq,xrx200-mdio: probed
[ 1.764000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00,
irq=-1)
[ 1.832000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05,
irq=-1)
[ 1.900000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4]
(phy_addr=0:11, irq=-1)
[ 1.968000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4]
(phy_addr=0:13, irq=-1)
[ 1.976000] wdt 1f8803f0.watchdog: Init done
[ 1.980000] TCP: cubic registered
[ 1.980000] NET: Registered protocol family 17
[ 1.984000] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.000000] 8021q: 802.1Q VLAN Support v1.8
[ 2.076000] ath9k,eeprom ath9k_eep: using led pin 0.
[ 2.080000] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
[ 2.088000] UBIFS error (pid 1): ubifs_mount: cannot open
"ubi0:rootfs", error -19
[ 2.188000] VFS: Mounted root (squashfs filesystem) readonly on device
31:2.
[ 2.196000] Freeing unused kernel memory: 148K (8045b000 - 80480000)
[ 3.860000] eth0: port 5 got link
[ 15.600000] init: Console is alive
[ 15.604000] init: - watchdog -
[ 32.972000] random: nonblocking pool is initialized
[ 33.056000] dwc2 1e101000.ifxhcd: requested GPIO 489
[ 33.916000] dwc2 1e101000.ifxhcd: DWC OTG Controller
[ 33.916000] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus
number 1
[ 33.924000] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[ 33.932000] dwc2 1e101000.ifxhcd: Hardware does not support descriptor
DMA mode -
[ 33.932000] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[ 33.944000] hub 1-0:1.0: USB hub found
[ 33.948000] hub 1-0:1.0: 1 port detected
[ 34.812000] dwc2 1e106000.ifxhcd: DWC OTG Controller
[ 34.812000] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus
number 2
[ 34.820000] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[ 34.828000] dwc2 1e106000.ifxhcd: Hardware does not support descriptor
DMA mode -
[ 34.828000] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[ 34.840000] hub 2-0:1.0: USB hub found
[ 34.844000] hub 2-0:1.0: 1 port detected
[ 35.724000] init: - preinit -
[ 40.608000] jffs2_scan_eraseblock(): End of filesystem marker found at
0x10000
[ 40.612000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 40.620000] jffs2_build_filesystem(): erasing all blocks after the end
marker... done.
[ 73.752000] jffs2: notice: (295) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of
xref (0 dead, 0 orphan) found.
[ 73.772000] mount_root: overlay filesystem has not been fully
initialized yet
[ 74.392000] mount_root: switching to jffs2 overlay
[ 77.768000] procd: - early -
[ 77.768000] procd: - watchdog -
[ 78.380000] eth0: port 5 lost link
[ 79.704000] procd: - ubus -
[ 80.716000] procd: - init -
[ 81.772000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq
Deutschland GmbH
[ 81.772000]
[ 81.796000] NET: Registered protocol family 10
[ 81.804000] NET: Registered protocol family 8
[ 81.808000] NET: Registered protocol family 20
[ 81.816000] tun: Universal TUN/TAP device driver, 1.6
[ 81.820000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 81.836000] PPP generic driver version 2.4.2
[ 81.848000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 81.884000] MEI CPE Driver, Version 1.2.0
[ 81.884000]
[ 81.888000] (c) Copyright 2009, Infineon Technologies AG
[ 81.888000]
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
[ 81.896000]
[ 81.896000]
[ 81.896000] Lantiq CPE API Driver version: DSL CPE API V4.11.4
[ 81.920000]
[ 81.920000] Predefined debug level: 2
[ 81.952000] u32 classifier
[ 81.952000] input device check on
[ 81.956000] Actions configured
[ 81.960000] Mirror/redirect action on
[ 81.984000] nf_conntrack version 0.5.0 (940 buckets, 3760 max)
[ 82.004000] Loading modules backported from Linux version
master-2015-03-09-0-g141f155
[ 82.012000] Backport generated by backports.git
backports-20150129-0-gdd4a670
[ 82.024000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 82.036000] Infineon Technologies DEU driver version 2.0.0
[ 82.048000] IFX DEU DES initialized (multiblock).
[ 82.056000] IFX DEU AES initialized (multiblock).
[ 82.064000] IFX DEU ARC4 initialized (multiblock).
[ 82.064000] IFX DEU SHA1 initialized.
[ 82.072000] IFX DEU MD5 initialized.
[ 82.072000] IFX DEU SHA1_HMAC initialized.
[ 82.080000] IFX DEU MD5_HMAC initialized.
[ 82.124000] NET: Registered protocol family 24
[ 82.176000] xt_time: kernel timezone is -0000
[ 82.320000] cfg80211: Calling CRDA to update world regulatory domain
[ 82.332000] cfg80211: World regulatory domain updated:
[ 82.336000] cfg80211: DFS Master region: unset
[ 82.340000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 82.348000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 82.356000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 82.364000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 82.372000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 82.380000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 82.392000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 82.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 82.408000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 82.648000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 82.652000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 82.664000] ath: EEPROM regdomain: 0x0
[ 82.664000] ath: EEPROM indicates default country code should be used
[ 82.664000] ath: doing EEPROM country->regdmn map search
[ 82.664000] ath: country maps to regdmn code: 0x3a
[ 82.664000] ath: Country alpha2 being used: US
[ 82.664000] ath: Regpair used: 0x3a
[ 82.672000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 82.676000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xbc000000,
irq=144
[ 82.684000] cfg80211: Calling CRDA for country: US
[ 82.692000] cfg80211: Regulatory domain changed to country: US
[ 82.696000] cfg80211: DFS Master region: FCC
[ 82.700000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 82.708000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
3000 mBm), (N/A)
[ 82.716000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 82.728000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 82.736000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
3000 mBm), (N/A)
[ 82.744000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 101.340000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 101.356000] device eth0.1 entered promiscuous mode
[ 101.360000] device eth0 entered promiscuous mode
[ 101.372000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 101.648000] eth0: port 5 got link
[ 101.648000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 101.656000] br-lan: port 1(eth0.1) entered forwarding state
[ 101.660000] br-lan: port 1(eth0.1) entered forwarding state
[ 101.676000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 102.896000] br-lan: port 1(eth0.1) entered disabled state
[ 103.896000] br-lan: port 1(eth0.1) entered forwarding state
[ 103.900000] br-lan: port 1(eth0.1) entered forwarding state
[ 105.904000] br-lan: port 1(eth0.1) entered forwarding state
[ 111.696000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 111.708000] device wlan0 entered promiscuous mode
[ 115.776000] br-lan: port 2(wlan0) entered forwarding state
[ 115.780000] br-lan: port 2(wlan0) entered forwarding state
[ 115.788000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 117.784000] br-lan: port 2(wlan0) entered forwarding state
[ 127.108000] PTM 1.0.27 PTM (E1) firmware version 0.30
[ 127.112000] ifxmips_ptm: PTM init succeed
[ 127.188000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 127.228000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 127.392000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 127.420000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.040000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.080000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.392000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.408000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.796000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 128.956000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 129.040000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 129.056000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 129.584000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 129.888000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 132.076000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 137.136000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 142.172000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 147.628000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 147.640000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 147.904000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 147.948000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 148.240000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 148.288000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 148.392000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 148.948000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 148.964000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 149.336000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 149.396000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 149.408000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 149.956000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 150.220000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 150.272000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 153.280000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 158.348000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 164.312000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 164.356000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 164.516000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 164.688000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 164.872000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.284000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.516000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.528000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.720000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.872000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.884000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 165.984000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 166.136000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 166.392000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 166.516000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 170.808000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 175.872000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 179.820000] device tap9 entered promiscuous mode
[ 179.848000] br-dm: port 1(tap9) entered forwarding state
[ 179.852000] br-dm: port 1(tap9) entered forwarding state
[ 179.936000] device tap3 entered promiscuous mode
[ 179.940000] br-dm: port 2(tap3) entered forwarding state
[ 179.944000] br-dm: port 2(tap3) entered forwarding state
[ 180.028000] device tap1 entered promiscuous mode
[ 180.032000] br-dm: port 3(tap1) entered forwarding state
[ 180.040000] br-dm: port 3(tap1) entered forwarding state
[ 181.808000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 181.820000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 181.856000] br-dm: port 1(tap9) entered forwarding state
[ 181.936000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 181.948000] br-dm: port 2(tap3) entered forwarding state
[ 181.956000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 182.044000] br-dm: port 3(tap1) entered forwarding state
[ 182.072000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 182.496000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 182.956000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 182.968000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.028000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.108000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.120000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.720000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.848000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.916000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 183.976000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 184.340000] device tap0 entered promiscuous mode
[ 184.344000] br-dm: port 4(tap0) entered forwarding state
[ 184.348000] br-dm: port 4(tap0) entered forwarding state
[ 186.352000] br-dm: port 4(tap0) entered forwarding state
[ 188.112000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 193.176000] /home/daniele/dev/openwrt/openwrt/build_dir/target-
mips_34kc+dsp_musl-1.1.10/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 195.328000] enter showtime
[ 195.332000] enter showtime
[ 215.880000] pppoe-wan: renamed from ppp0
[40026.216000] eth0: tx ring full
[48706.932000] eth0: port 5 lost link
[48706.932000] br-lan: port 1(eth0.1) entered disabled state
[48707.932000] eth0: port 5 got link
[48707.932000] br-lan: port 1(eth0.1) entered forwarding state
[48707.936000] br-lan: port 1(eth0.1) entered forwarding state
[48709.940000] br-lan: port 1(eth0.1) entered forwarding state
[48781.932000] eth0: port 5 lost link
[48781.932000] br-lan: port 1(eth0.1) entered disabled state
[48786.932000] eth0: port 5 got link
[48786.932000] br-lan: port 1(eth0.1) entered forwarding state
[48786.936000] br-lan: port 1(eth0.1) entered forwarding state
[48788.940000] br-lan: port 1(eth0.1) entered forwarding state
[49094.932000] eth0: port 5 lost link
[49094.932000] br-lan: port 1(eth0.1) entered disabled state
[49095.932000] eth0: port 5 got link
[49095.932000] br-lan: port 1(eth0.1) entered forwarding state
[49095.936000] br-lan: port 1(eth0.1) entered forwarding state
[49097.940000] br-lan: port 1(eth0.1) entered forwarding state
[49117.932000] eth0: port 5 lost link
[49117.932000] br-lan: port 1(eth0.1) entered disabled state
[49118.932000] eth0: port 5 got link
[49118.932000] br-lan: port 1(eth0.1) entered forwarding state
[49118.936000] br-lan: port 1(eth0.1) entered forwarding state
[49120.940000] br-lan: port 1(eth0.1) entered forwarding state
[49196.932000] eth0: port 5 lost link
[49196.932000] br-lan: port 1(eth0.1) entered disabled state
[49198.932000] eth0: port 5 got link
[49198.932000] br-lan: port 1(eth0.1) entered forwarding state
[49198.940000] br-lan: port 1(eth0.1) entered forwarding state
[49200.944000] br-lan: port 1(eth0.1) entered forwarding state
[50194.932000] eth0: port 5 lost link
[50194.932000] br-lan: port 1(eth0.1) entered disabled state
[50196.932000] eth0: port 5 got link
[50196.932000] br-lan: port 1(eth0.1) entered forwarding state
[50196.936000] br-lan: port 1(eth0.1) entered forwarding state
[50198.940000] br-lan: port 1(eth0.1) entered forwarding state
[50264.932000] eth0: port 5 lost link
[50264.932000] br-lan: port 1(eth0.1) entered disabled state
[50265.932000] eth0: port 5 got link
[50265.932000] br-lan: port 1(eth0.1) entered forwarding state
[50265.936000] br-lan: port 1(eth0.1) entered forwarding state
[50267.940000] br-lan: port 1(eth0.1) entered forwarding state
[50719.932000] eth0: port 5 lost link
[50719.932000] br-lan: port 1(eth0.1) entered disabled state
[50721.932000] eth0: port 5 got link
[50721.932000] br-lan: port 1(eth0.1) entered forwarding state
[50721.936000] br-lan: port 1(eth0.1) entered forwarding state
[50723.940000] br-lan: port 1(eth0.1) entered forwarding state
[50917.932000] eth0: port 5 lost link
[50917.932000] br-lan: port 1(eth0.1) entered disabled state
[50919.932000] eth0: port 5 got link
[50919.932000] br-lan: port 1(eth0.1) entered forwarding state
[50919.936000] br-lan: port 1(eth0.1) entered forwarding state
[50921.940000] br-lan: port 1(eth0.1) entered forwarding state
[50923.932000] eth0: port 5 lost link
[50923.932000] br-lan: port 1(eth0.1) entered disabled state
[50924.932000] eth0: port 5 got link
[50924.932000] br-lan: port 1(eth0.1) entered forwarding state
[50924.936000] br-lan: port 1(eth0.1) entered forwarding state
[50926.940000] br-lan: port 1(eth0.1) entered forwarding state
[51066.932000] eth0: port 5 lost link
[51066.932000] br-lan: port 1(eth0.1) entered disabled state
[51068.932000] eth0: port 5 got link
[51068.932000] br-lan: port 1(eth0.1) entered forwarding state
[51068.936000] br-lan: port 1(eth0.1) entered forwarding state
[51070.940000] br-lan: port 1(eth0.1) entered forwarding state
[51508.104000] nf_conntrack: automatic helper assignment is deprecated and
it will be removed soon. Use the iptables CT target to attach helpers
instead.
[51650.932000] eth0: port 5 lost link
[51650.932000] br-lan: port 1(eth0.1) entered disabled state
[51653.932000] eth0: port 5 got link
[51653.932000] br-lan: port 1(eth0.1) entered forwarding state
[51653.936000] br-lan: port 1(eth0.1) entered forwarding state
[51655.940000] br-lan: port 1(eth0.1) entered forwarding state
[51979.932000] eth0: port 5 lost link
[51979.932000] br-lan: port 1(eth0.1) entered disabled state
[51981.932000] eth0: port 5 got link
[51981.932000] br-lan: port 1(eth0.1) entered forwarding state
[51981.936000] br-lan: port 1(eth0.1) entered forwarding state
[51983.940000] br-lan: port 1(eth0.1) entered forwarding state
[57762.772000] eth0: tx ring full
[57776.808000] eth0: tx ring full
[57792.480000] eth0: tx ring full
[57833.616000] eth0: tx ring full
[58102.728000] eth0: tx ring full
[58144.084000] eth0: tx ring full
[58212.084000] eth0: tx ring full
[58460.080000] eth0: port 5 lost link
[58460.080000] br-lan: port 1(eth0.1) entered disabled state
[58462.080000] eth0: port 5 got link
[58462.080000] br-lan: port 1(eth0.1) entered forwarding state
[58462.084000] br-lan: port 1(eth0.1) entered forwarding state
[58464.088000] br-lan: port 1(eth0.1) entered forwarding state
[58466.080000] eth0: port 5 lost link
[58466.080000] br-lan: port 1(eth0.1) entered disabled state
[58467.080000] eth0: port 5 got link
[58467.080000] br-lan: port 1(eth0.1) entered forwarding state
[58467.084000] br-lan: port 1(eth0.1) entered forwarding state
[58469.088000] br-lan: port 1(eth0.1) entered forwarding state
[58471.080000] eth0: port 5 lost link
[58471.080000] br-lan: port 1(eth0.1) entered disabled state
[58473.080000] eth0: port 5 got link
[58473.080000] br-lan: port 1(eth0.1) entered forwarding state
[58473.084000] br-lan: port 1(eth0.1) entered forwarding state
[58475.088000] br-lan: port 1(eth0.1) entered forwarding state
[58485.084000] eth0: port 5 lost link
[58485.084000] br-lan: port 1(eth0.1) entered disabled state
[58489.084000] eth0: port 5 got link
[58489.084000] br-lan: port 1(eth0.1) entered forwarding state
[58489.088000] br-lan: port 1(eth0.1) entered forwarding state
[58491.084000] eth0: port 5 lost link
[58491.084000] br-lan: port 1(eth0.1) entered disabled state
[58493.084000] eth0: port 5 got link
[58493.084000] br-lan: port 1(eth0.1) entered forwarding state
[58493.088000] br-lan: port 1(eth0.1) entered forwarding state
[58495.092000] br-lan: port 1(eth0.1) entered forwarding state
[58513.092000] eth0: port 5 lost link
[58513.092000] br-lan: port 1(eth0.1) entered disabled state
[58515.092000] eth0: port 5 got link
[58515.092000] br-lan: port 1(eth0.1) entered forwarding state
[58515.096000] br-lan: port 1(eth0.1) entered forwarding state
[58517.100000] br-lan: port 1(eth0.1) entered forwarding state
[58950.276000] eth0: tx ring full
[59036.960000] eth0: tx ring full
[62974.360000] eth0: port 2 got link
[63603.860000] IPv6: udp checksum is 0 for
[fd9b:264f:47a9:0:adeb:f24c:f732:b055]:54271->[fd9b:264f:47a9::1]:53
[64780.388000] eth0: port 2 lost link
[64780.392000] br-lan: port 1(eth0.1) entered disabled state
[64781.352000] br-lan: port 1(eth0.1) entered forwarding state
[64781.356000] br-lan: port 1(eth0.1) entered forwarding state
[64783.360000] br-lan: port 1(eth0.1) entered forwarding state
[67645.360000] eth0: port 5 lost link
[67645.360000] br-lan: port 1(eth0.1) entered disabled state
[67651.360000] eth0: port 5 got link
[67651.360000] br-lan: port 1(eth0.1) entered forwarding state
[67651.364000] br-lan: port 1(eth0.1) entered forwarding state
[67653.368000] br-lan: port 1(eth0.1) entered forwarding state
[68521.364000] eth0: port 5 lost link
[68521.364000] br-lan: port 1(eth0.1) entered disabled state
[68524.364000] eth0: port 5 got link
[68524.364000] br-lan: port 1(eth0.1) entered forwarding state
[68524.368000] br-lan: port 1(eth0.1) entered forwarding state
[68526.372000] br-lan: port 1(eth0.1) entered forwarding state
[68546.364000] eth0: port 5 lost link
[68546.364000] br-lan: port 1(eth0.1) entered disabled state
[68548.364000] eth0: port 5 got link
[68548.364000] br-lan: port 1(eth0.1) entered forwarding state
[68548.368000] br-lan: port 1(eth0.1) entered forwarding state
[68550.372000] br-lan: port 1(eth0.1) entered forwarding state
}}
Thanks
Daniele.
--
Ticket URL: <https://dev.openwrt.org/ticket/19995#comment:1>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
