#19896: WDR4900 / mpc85xx target broken with musl
--------------------------+------------------------
Reporter: arokh | Owner: developers
Type: defect | Status: reopened
Priority: highest | Milestone:
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+------------------------
Comment (by anonymous):
@nbd
It does not even work with a clean build.
{{{
[ 0.044523] msgmni has been set to 246
[ 0.050931] io scheduler noop registered
[ 0.050946] io scheduler deadline registered (default)
[ 0.074479] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.075078] console [ttyS0] disabled
[ 0.075114] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud
= 24999999) is a 16550A
[ 0.633400] console [ttyS0] enabled
[ 0.637412] console [ttyS0] disabled
[ 0.641023] ffe04500.serial: ttyS0 at MMIO 0xffe04500 (irq = 42,
base_baud = 24999999) is a 16550
[ 1.215166] console [ttyS0] enabled
[ 1.218924] Generic RTC Driver v1.07
[ 1.223260] fsl_espi ffe07000.spi: cs=0, init_csmode=0x100008
[ 1.229118] fsl_espi ffe07000.spi: master is unqueued, this is
deprecated
[ 1.263657] m25p80 spi0.0: s25fl129p1 (16384 Kbytes)
[ 1.268773] 7 ofpart partitions found on MTD device spi0.0
[ 1.274263] Creating 7 MTD partitions on "spi0.0":
[ 1.279054] 0x000000000000-0x000000050000 : "u-boot"
[ 1.284535] 0x000000050000-0x000000060000 : "dtb"
[ 1.289686] 0x000000060000-0x000000300000 : "kernel"
[ 1.295085] 0x000000300000-0x000000fe0000 : "rootfs"
[ 1.300477] mtd: device 3 (rootfs) set to be root filesystem
[ 1.306363] 1 squashfs-split partitions found on MTD device rootfs
[ 1.312555] 0x000000580000-0x000000fe0000 : "rootfs_data"
[ 1.318425] 0x000000fe0000-0x000000ff0000 : "config"
[ 1.323844] 0x000000ff0000-0x000001000000 : "caldata"
[ 1.329342] 0x000000060000-0x000000fe0000 : "firmware"
[ 1.334948] fsl_espi ffe07000.spi: at 0xc9038000 (irq = 59)
[ 1.341098] libphy: Freescale PowerQUICC MII Bus: probed
[ 1.352057] switch0: Atheros AR8327 rev. 4 switch registered on
mdio@ffe24000
[ 1.413004] fsl-gianfar soc@ffe00000:ethernet@b0000: enabled errata
workarounds, flags: 0x4
[ 1.431616] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: mac:
64:66:b3:de:dc:a5
[ 1.439020] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: Running with
NAPI enabled
[ 1.446677] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: RX BD ring
size for Q[0]: 256
[ 1.454680] fsl-gianfar soc@ffe00000:ethernet@b0000 eth0: TX BD ring
size for Q[0]: 256
[ 1.462799] ucc_geth_driver: QE UCC Gigabit Ethernet Controller
[ 1.469032] TCP: cubic registered
[ 1.472361] NET: Registered protocol family 17
[ 1.476872] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.489486] 8021q: 802.1Q VLAN Support v1.8
[ 1.498847] VFS: Mounted root (squashfs filesystem) readonly on device
31:3.
[ 1.506301] Freeing unused kernel memory: 136K (c030d000 - c032f000)
[ 1.532377] random: nonblocking pool is initialized
[ 1.785189] Kernel panic - not syncing: No working init found. Try
passing init= option to kernel. See Linux Documentation/init.txt for
guidance.
[ 1.798319] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.18 #1
[ 1.804142] Call Trace:
[ 1.806595] [c7835ed0] [c0277cec] panic+0xc8/0x1f0 (unreliable)
[ 1.812516] [c7835f30] [c0002988] kernel_init+0xf8/0x110
[ 1.817826] [c7835f40] [c000cac0] ret_from_kernel_thread+0x5c/0x64
[ 1.824001] ---[ end Kernel panic - not syncing: No working init found.
Try passing init= option to kernel. See Linux Documentation/init.txt for
guidance.
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/19896#comment:36>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
