#20291: WGT634U fails to boot with trunk and 15.05-rc3 (worked with rc1),
stalls at
"Starting program at 0x80001000"
----------------------------+----------------------------------
Reporter: GregorHoffleit | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Keywords: |
----------------------------+----------------------------------
WGT634U worked with 15.05-rc1 (r45695), but fails to boot with 15.05-rc3.
The boot stops at "Starting program at 0x80001000" (see below).
The nightly snapshot from trunk fails as well. I haven't tried RC2, since
this is marked as broken.
Can I help debugging this problem?
{{{
CFE version 1.0.34 for BCM95365R (32bit,SP,LE)
Build Date: Tue Feb 24 03:21:41 CST 2004 (root@jackylinux)
Copyright (C) 2000,2001,2002 Broadcom Corporation.
Add MAC client version(DNI).
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
CPU type 0x29007: 200MHz
Total memory: 0x2000000 bytes (32MB)
Total memory used by CFE: 0x81BB1280 - 0x82000000 (4517248)
Initialized Data: 0x81BB1280 - 0x81BB3E90 (11280)
BSS Area: 0x81BB3E90 - 0x81BB45D0 (1856)
Local Heap: 0x81BB45D0 - 0x81FB45D0 (4194304)
Stack Area: 0x81FB45D0 - 0x81FB65D0 (8192)
Text (code) segment: 0x81FB65E0 - 0x81FFFFB0 (301520)
Boot area (physical): 0x01B70000 - 0x01BB0000
Relocation Factor: I:E23B65E0 - D:01BB0280
configure vlans
*****************************************************************
*********************** VLAN Driver initial ********************
*****************************************************************
Process LAN port(2-5) vlan Architecture...
SUCCESS: trying to create VLAN 0 for switch
SUCCESS: trying to add LAN port
Process WAN port(2-5) vlan Architecture...
SUCCESS: trying to create VLAN 0 for switch
SUCCESS: trying to add WAN port
SUCCESS: enable ports success
configure vlans...done
Device eth0: hwaddr 00-09-5B-F7-DD-10, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Loader:elf Filesys:raw Dev:flash0.os File: Options:(null)
***************************
**** MAC Client V1.0 ****
***************************
et0macaddr value :flag =0 value=00-09-5b-f7-dd-10
et1macaddr value :flag =0 value=00-09-5b-f7-ee-11
MAC exist at least one
system ethernet mac exist and not default....
Skip mac client process.....
Loading: 0x80000000/7808 Entry at 0x80001000
Closing network.
et0: link down
Starting program at 0x80001000
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/20291>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
