#20468: rtl8192cu fail to work
-----------------------+------------------------
Reporter: Panderine | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: packages | Version: Trunk
Keywords: rtl8192cu |
-----------------------+------------------------
Hi,
I'm trying to make a usb wireless card to work with my netgear wndr4300
router.
Edimax EW-7811Un - Micro Wireless-N USB adapter (USB ID 7392:7811,
RTL8192CU)
uses kmod-rtl8192cu
Using all this packages:
wpad
kmod-scsi-core
kmod-usb-storage
kmod-crypto-hash
kmod-lib-crc16
block-mount
kmod-rtl8192cu
kmod-rtl8192c-common
kmod-rtlwifi
kmod-rtlwifi-usb
On ar71xxx CC-R3 (also tried in BB same results and errors)
After installing all packages, wifi detect, and rebooting:
1. insert usb card
2. Do a scan from luci
This is the kernel log. Nothing happens router semi-hangs. Reboot needed
to recover.
[ 158.115709] usb 1-1: new high-speed USB device number 2 using ehci-
platform
[ 158.271865] rtl8192cu: Chip version 0x10
[ 158.389294] rtl8192cu: MAC address: 74:da:38:0c:03:02
[ 158.394550] rtl8192cu: Board Type 0
[ 158.399406] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 158.406463] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 158.413654] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
[ 403.806631] rtl8192cu: MAC auto ON okay!
[ 403.849187] rtl8192cu: Tx queue select: 0x05
[ 407.875740] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 421.098752] rtl_usb: reg 0x603, usbctrl_vendorreq TimeOut!
status:0xffffff6f value=0x2a2a2a
[ 421.858931] rtl_usb: reg 0x608, usbctrl_vendorreq TimeOut!
status:0xffffff6f value=0x0
[ 431.099049] rtl_usb: reg 0x442, usbctrl_vendorreq TimeOut!
status:0xffffff6f value=0x4000300
[ 431.859187] rtl_usb: reg 0xda0, usbctrl_vendorreq TimeOut!
status:0xffffff6f value=0x300
Also, while installing the needed packages got a bunch of unknown symbols:
[ 260.840000] sd_mod: Unknown symbol scsi_mode_sense (err 0)
[ 260.850000] sd_mod: Unknown symbol scsi_device_get (err 0)
[ 260.850000] sd_mod: Unknown symbol scsi_get_sense_info_fld (err 0)
[ 260.860000] sd_mod: Unknown symbol scsi_get_vpd_page (err 0)
[ 260.870000] sd_mod: Unknown symbol scsicam_bios_param (err 0)
[ 260.870000] sd_mod: Unknown symbol scsi_command_normalize_sense (err 0)
[ 260.880000] sd_mod: Unknown symbol scsi_init_io (err 0)
[ 260.890000] sd_mod: Unknown symbol scsi_device_set_state (err 0)
[ 260.890000] sd_mod: Unknown symbol scsi_test_unit_ready (err 0)
[ 260.900000] sd_mod: Unknown symbol scsi_block_when_processing_errors
(err 0)
[ 260.910000] sd_mod: Unknown symbol scsi_register_driver (err 0)
[ 260.910000] sd_mod: Unknown symbol scsi_ioctl (err 0)
[ 260.920000] sd_mod: Unknown symbol scsi_nonblockable_ioctl (err 0)
[ 260.920000] sd_mod: Unknown symbol scsi_show_sense_hdr (err 0)
[ 260.930000] sd_mod: Unknown symbol scsi_device_put (err 0)
[ 260.940000] sd_mod: Unknown symbol scsi_sd_probe_domain (err 0)
[ 260.940000] sd_mod: Unknown symbol scsi_sd_pm_domain (err 0)
[ 260.950000] sd_mod: Unknown symbol scsi_report_opcode (err 0)
[ 260.950000] sd_mod: Unknown symbol scsi_show_result (err 0)
[ 260.960000] sd_mod: Unknown symbol scsi_mode_select (err 0)
[ 260.970000] sd_mod: Unknown symbol scsi_print_sense (err 0)
[ 260.970000] sd_mod: Unknown symbol scsi_execute_req_flags (err 0)
[ 260.980000] sd_mod: Unknown symbol scsi_show_extd_sense (err 0)
[ 260.980000] sd_mod: Unknown symbol scsi_set_medium_removal (err 0)
[ 278.290000] usb_storage: Unknown symbol scsi_report_device_reset (err
0)
[ 278.300000] usb_storage: Unknown symbol scsi_remove_host (err 0)
[ 278.310000] usb_storage: Unknown symbol scsi_report_bus_reset (err 0)
[ 278.320000] usb_storage: Unknown symbol scsi_sense_desc_find (err 0)
[ 278.320000] usb_storage: Unknown symbol scsi_eh_prep_cmnd (err 0)
[ 278.330000] usb_storage: Unknown symbol scsi_host_put (err 0)
[ 278.340000] usb_storage: Unknown symbol scsi_scan_host (err 0)
[ 278.340000] usb_storage: Unknown symbol scsi_is_host_device (err 0)
[ 278.350000] usb_storage: Unknown symbol scsi_eh_restore_cmnd (err 0)
[ 278.350000] usb_storage: Unknown symbol scsi_cmd_get_serial (err 0)
[ 278.360000] usb_storage: Unknown symbol scsi_add_host_with_dma (err 0)
[ 278.370000] usb_storage: Unknown symbol scsi_normalize_sense (err 0)
[ 278.380000] usb_storage: Unknown symbol scsi_host_alloc (err 0)
[ 278.380000] usb_storage: Unknown symbol scsi_get_host_dev (err 0)
[ 426.690000] rtl8192cu: Unknown symbol rtl92c_phy_sw_chnl (err 0)
[ 426.700000] rtl8192cu: Unknown symbol rtl92c_fill_h2c_cmd (err 0)
[ 426.700000] rtl8192cu: Unknown symbol
_rtl92c_phy_bb8192c_config_parafile (err 0)
[ 426.710000] rtl8192cu: Unknown symbol dm_restorepowerindex (err 0)
[ 426.720000] rtl8192cu: Unknown symbol
_rtl92c_store_pwrIndex_diffrate_offset (err 0)
[ 426.730000] rtl8192cu: Unknown symbol rtl92c_phy_query_bb_reg (err 0)
[ 426.730000] rtl8192cu: Unknown symbol rtl92ce_phy_set_rf_on (err 0)
[ 426.740000] rtl8192cu: Unknown symbol rtl92c_phy_rf_config (err 0)
[ 426.750000] rtl8192cu: Unknown symbol rtl92c_phy_set_io_cmd (err 0)
[ 426.750000] rtl8192cu: Unknown symbol rtl92c_download_fw (err 0)
[ 426.760000] rtl8192cu: Unknown symbol rtl92c_set_fw_joinbss_report_cmd
(err 0)
[ 426.770000] rtl8192cu: Unknown symbol _rtl92c_phy_set_rf_sleep (err 0)
[ 426.780000] rtl8192cu: Unknown symbol _rtl92c_phy_fw_rf_serial_write
(err 0)
[ 426.780000] rtl8192cu: Unknown symbol dm_writepowerindex (err 0)
[ 426.790000] rtl8192cu: Unknown symbol rtl92c_set_fw_pwrmode_cmd (err 0)
[ 426.800000] rtl8192cu: Unknown symbol rtl92c_dm_rf_saving (err 0)
[ 426.800000] rtl8192cu: Unknown symbol rtl92c_phy_set_bb_reg (err 0)
[ 426.810000] rtl8192cu: Unknown symbol rtl92c_dm_init (err 0)
[ 426.820000] rtl8192cu: Unknown symbol rtl92c_phy_iq_calibrate (err 0)
[ 426.830000] rtl8192cu: Unknown symbol rtl92c_dm_init_edca_turbo (err 0)
[ 426.830000] rtl8192cu: Unknown symbol _rtl92c_phy_calculate_bit_shift
(err 0)
[ 426.840000] rtl8192cu: Unknown symbol rtl92c_phy_lc_calibrate (err 0)
[ 426.850000] rtl8192cu: Unknown symbol rtl92c_phy_set_bw_mode (err 0)
[ 426.850000] rtl8192cu: Unknown symbol _rtl92c_phy_rf_serial_read (err
0)
[ 426.860000] rtl8192cu: Unknown symbol _rtl92c_phy_rf_serial_write (err
0)
[ 426.870000] rtl8192cu: Unknown symbol
_rtl92c_phy_init_bb_rf_register_definition (err 0)
[ 426.880000] rtl8192cu: Unknown symbol rtl92c_dm_watchdog (err 0)
[ 426.880000] rtl8192cu: Unknown symbol rtl92c_dm_check_txpower_tracking
(err 0)
[ 426.890000] rtl8192cu: Unknown symbol rtl92c_set_fw_rsvdpagepkt (err 0)
[ 426.900000] rtl8192cu: Unknown symbol rtl92c_phy_set_txpower_level (err
0)
[ 426.910000] rtl8192cu: Unknown symbol _rtl92c_phy_fw_rf_serial_read
(err 0)
[ 426.910000] rtl8192cu: Unknown symbol rtl92c_phy_set_rfpath_switch (err
0)
Is there something I can do to fix this and be able to use the usb card as
another (third in this case) radio?
Thanks in advance!
--
Ticket URL: <https://dev.openwrt.org/ticket/20468>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
