#20854: ath10k "failed to delete peer" kernel errors causing wireless failure
---------------------------+------------------------
Reporter: hancockrwd@… | Owner: developers
Type: defect | Status: reopened
Priority: normal | Milestone:
Component: kernel | Version: Trunk
Resolution: | Keywords:
---------------------------+------------------------
Comment (by anonymous):
Still happens for me with 10.2.4.70.12-2:
{{{
[ 0.000000] Linux version 4.1.11 (xdarklight@blackbox) (gcc version
4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47327) ) #27 Sat Nov 7 14:53:50 CET
2015
[ 0.000000] SoC: VR9 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is BTHOMEHUBV5A - BT Home Hub 5A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 8054dd30, node_mem_map
81008a20
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32512
[ 0.000000] Kernel command line: console=ttyLTQ0,115200
init=/etc/preinit
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Writing ErrCtl register=00021800
[ 0.000000] Readback ErrCtl register=00021800
[ 0.000000] Memory: 123896K/131072K available (4080K kernel code, 264K
rwdata, 1076K rodata, 256K init, 261K bss, 7176K reserved, 0K cma-
reserved)
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041786 ns
[ 0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every
8589934590ns
[ 0.008260] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.042332] pid_max: default: 32768 minimum: 301
[ 0.047339] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.053821] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.067656] clocksource jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.077426] pinctrl core: initialized pinctrl subsystem
[ 0.083253] NET: Registered protocol family 16
[ 0.092709] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.098280] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7,
channels: 28
[ 0.208615] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.231817] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[ 0.237467] MEM 0x0000000018000000..0x0000000019ffffff
[ 0.242717] IO 0x000000001ae00000..0x000000001affffff
[ 0.366120] ath9k,eeprom ath9k_eep: failed to load eeprom address
[ 0.395543] usbcore: registered new interface driver usbfs
[ 0.401040] usbcore: registered new interface driver hub
[ 0.406419] usbcore: registered new device driver usb
[ 0.411772] PCI host bridge to bus 0000:00
[ 0.415760] pci_bus 0000:00: root bus resource [mem
0x18000000-0x19ffffff]
[ 0.422670] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 0.428661] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
0x0]
[ 0.435515] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.443571] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
[ 0.443625] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 0.444049] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.444096] pci 0000:00:0e.0: BAR 0: assigned [mem
0x18000000-0x1800ffff]
[ 0.450958] PCI host bridge to bus 0000:01
[ 0.454939] pci_bus 0000:01: root bus resource [mem
0x1c000000-0x1cffffff]
[ 0.461854] pci_bus 0000:01: root bus resource [io
0x1d800000-0x1d8fffff]
[ 0.468798] pci_bus 0000:01: root bus resource [??? 0x00000000 flags
0x0]
[ 0.475653] pci_bus 0000:01: No busn resource found for root bus, will
use [bus 01-ff]
[ 0.483683] pci 0000:01:00.0: [1bef:0011] type 01 class 0x060000
[ 0.483708] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to
pci-pci bridge
[ 0.501465] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.501812] pci 0000:01:00.0: bridge configuration invalid ([bus
02-00]), reconfiguring
[ 0.509985] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000
[ 0.510059] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff
64bit]
[ 0.510138] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
pref]
[ 0.510242] pci 0000:02:00.0: supports D1 D2
[ 0.510524] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.510563] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 02
[ 0.510621] pci 0000:01:00.0: BAR 8: assigned [mem
0x1c000000-0x1c1fffff]
[ 0.517301] pci 0000:01:00.0: BAR 9: assigned [mem
0x1c200000-0x1c2fffff pref]
[ 0.524570] pci 0000:02:00.0: BAR 0: assigned [mem
0x1c000000-0x1c1fffff 64bit]
[ 0.531970] pci 0000:02:00.0: BAR 6: assigned [mem
0x1c200000-0x1c20ffff pref]
[ 0.539230] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.544265] pci 0000:01:00.0: bridge window [mem
0x1c000000-0x1c1fffff]
[ 0.551120] pci 0000:01:00.0: bridge window [mem
0x1c200000-0x1c2fffff pref]
[ 0.558493] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 0.565093] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 0.571441] ifx_pcie_bios_map_irq port 0 dev 0000:02:00.0 slot 0 pin 1
[ 0.578103] ifx_pcie_bios_map_irq dev 0000:02:00.0 irq 144 assigned
[ 0.585457] Switched to clocksource MIPS
[ 0.625010] NET: Registered protocol family 2
[ 0.630490] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.637376] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.643757] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.650311] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.656113] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.662814] NET: Registered protocol family 1
[ 0.667204] PCI: CLS 0 bytes, default 32
[ 0.667623] gptu: totally 6 16-bit timers/counters
[ 0.672468] gptu: misc_register on minor 63
[ 0.676560] gptu: succeeded to request irq 126
[ 0.681042] gptu: succeeded to request irq 127
[ 0.685558] gptu: succeeded to request irq 128
[ 0.690070] gptu: succeeded to request irq 129
[ 0.694583] gptu: succeeded to request irq 130
[ 0.699097] gptu: succeeded to request irq 131
[ 0.704572] phy-xrx200 gphy-xrx200: requesting
lantiq/vr9_phy11g_a2x.bin
[ 0.711904] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7A80000
[ 0.718232] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7A80000
[ 0.826197] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.842627] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.848374] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.860059] io scheduler noop registered
[ 0.863909] io scheduler deadline registered (default)
[ 0.869870] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112,
base_baud = 0) is a lantiq,asc
[ 0.878766] console [ttyLTQ0] enabled
[ 0.886097] bootconsole [early0] disabled
[ 0.897878] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.902769] nand: AMD/Spansion S34ML01G1
[ 0.906688] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048,
OOB size: 64
[ 0.914327] Scanning device for bad blocks
[ 0.940898] Bad eraseblock 155 at 0x000001360000
[ 1.065750] Bad eraseblock 995 at 0x000007c60000
[ 1.073013] 5 ofpart partitions found on MTD device 10000000.nand-parts
[ 1.078202] Creating 5 MTD partitions on "10000000.nand-parts":
[ 1.084119] 0x000000000000-0x000000040000 : "u-boot"
[ 1.090310] 0x000000040000-0x000000080000 : "uboot-env"
[ 1.095415] 0x000000080000-0x0000000a0000 : "caldata"
[ 1.100463] 0x0000000a0000-0x0000002a0000 : "kernel"
[ 1.105433] 0x0000002a0000-0x000008000000 : "ubi"
[ 1.213708] libphy: lantiq,xrx200-mdio: probed
[ 1.290188] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00,
irq=-1)
[ 1.358163] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:01,
irq=-1)
[ 1.364054] eth0 (uninitialized): no PHY found
[ 1.368216] xrx200-mdio: probing phy of port 2 failed
[ 1.434148] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4]
(phy_addr=0:13, irq=-1)
[ 1.506171] eth1: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05,
irq=-1)
[ 1.513183] wdt 1f8803f0.watchdog: Init done
[ 1.519231] NET: Registered protocol family 10
[ 1.527170] NET: Registered protocol family 17
[ 1.530323] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.542850] 8021q: 802.1Q VLAN Support v1.8
[ 1.550826] ath9k,eeprom ath9k_eep: pci slot: 14
[ 1.554023] pci 0000:00:0e.0: fixup device configuration
[ 1.560933] pci 0000:00:0e.0: fixup info: [168c:002d] revision 01 class
0x028000
[ 1.566924] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
[ 1.575887] UBI: auto-attach mtd4
[ 1.577635] ubi0: attaching mtd4
[ 2.219011] ubi0: scanning is finished
[ 2.260719] ubi0: attached mtd4 (name "ubi", size 125 MiB)
[ 2.264813] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024
bytes
[ 2.271650] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size
512
[ 2.278349] ubi0: VID header offset: 512 (aligned 512), data offset:
2048
[ 2.285137] ubi0: good PEBs: 1001, bad PEBs: 2, corrupted PEBs: 0
[ 2.291243] ubi0: user volume: 1, internal volumes: 1, max. volumes
count: 128
[ 2.298463] ubi0: max/mean erase counter: 5/1, WL threshold: 4096,
image sequence number: 1453961604
[ 2.307595] ubi0: available PEBs: 0, total reserved PEBs: 1001, PEBs
reserved for bad PEB handling: 18
[ 2.317916] ubi0: background thread "ubi_bgt0d" started, PID 246
[ 2.428456] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 248
[ 2.535115] UBIFS (ubi0:0): recovery needed
[ 3.061052] UBIFS (ubi0:0): recovery completed
[ 3.064223] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name
"rootfs"
[ 3.071483] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max.
I/O unit sizes: 2048 bytes/2048 bytes
[ 3.081389] UBIFS (ubi0:0): FS size: 124895232 bytes (119 MiB, 968
LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[ 3.091999] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 3.097841] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID
F6940B07-9C4C-4B1E-8309-2D2A067DE82D, small LPT model
[ 3.110717] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 3.116130] Freeing unused kernel memory: 256K (80550000 - 80590000)
[ 3.464873] init: Console is alive
[ 3.467167] init: - watchdog -
[ 4.791936] SCSI subsystem initialized
[ 4.858583] dwc2 1e101000.ifxhcd: requested GPIO 489
[ 5.717650] dwc2 1e101000.ifxhcd: DWC OTG Controller
[ 5.721223] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus
number 1
[ 5.728563] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[ 5.734089] dwc2 1e101000.ifxhcd: Hardware does not support descriptor
DMA mode -
[ 5.741526] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[ 5.748981] hub 1-0:1.0: USB hub found
[ 5.751987] hub 1-0:1.0: 1 port detected
[ 6.481728] init: - preinit -
[ 9.794052] random: procd urandom read with 37 bits of entropy
available
[ 9.892399] mount_root: mounting /dev/root
[ 9.903974] mount_root: loading kmods from internal overlay
[ 10.274246] block: attempting to load /etc/config/fstab
[ 10.287072] block: extroot: not configured
[ 10.301848] procd: - early -
[ 10.303416] procd: - watchdog -
[ 10.920419] procd: - ubus -
[ 11.950794] procd: - init -
[ 13.031657] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq
Deutschland GmbH
[ 13.070803] NET: Registered protocol family 8
[ 13.073776] NET: Registered protocol family 20
[ 13.094453] tun: Universal TUN/TAP device driver, 1.6
[ 13.098117] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 13.125964] PPP generic driver version 2.4.2
[ 13.148004] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.262940] Lantiq (VRX) DSL CPE MEI driver, version 1.4.8.4, (c) 2013
Lantiq Deutschland GmbH
[ 13.262940]
[ 13.262940] Lantiq CPE API Driver version: DSL CPE API V4.16.2.4
[ 13.380369]
[ 13.380369] Predefined debug level: 3
[ 13.389787] Loading modules backported from Linux version
master-2015-10-26-0-g28c26cb
[ 13.396319] Backport generated by backports.git
backports-20150903-4-g12cf266
[ 13.687788] cfg80211: World regulatory domain updated:
[ 13.691539] cfg80211: DFS Master region: unset
[ 13.695846] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.705603] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.713609] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.721616] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.729627] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.739115] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.748599] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 13.756693] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 13.764701] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 14.476124] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 14.480494] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 14.486591] ath10k_pci 0000:02:00.0: pci irq legacy interrupts 0
irq_mode 0 reset_mode 0
[ 14.935801] ath10k_pci 0000:02:00.0: Direct firmware load for
ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 14.944860] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 15.002418] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[ 16.050744] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff sub 0000:0000) fw 10.2.4.70.12-2 fwapi 5 bdapi 1 htt-ver 2.1
wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 features no-p2p
,raw-mode
[ 16.068603] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 1 dfs 1
testmode 1
[ 16.165624] ath: EEPROM regdomain: 0x833a
[ 16.165647] ath: EEPROM indicates we should expect a country code
[ 16.165669] ath: doing EEPROM country->regdmn map search
[ 16.165684] ath: country maps to regdmn code: 0x37
[ 16.165697] ath: Country alpha2 being used: GB
[ 16.165709] ath: Regpair used: 0x37
[ 16.177930] cfg80211: Regulatory domain changed to country: GB
[ 16.182381] cfg80211: DFS Master region: ETSI
[ 16.186599] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.196362] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 16.204367] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.213853] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000
KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.223339] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A,
2700 mBm), (0 s)
[ 16.231432] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 16.569979] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.590642] Infineon Technologies DEU driver version 2.0.0
[ 16.596468] IFX DEU DES initialized (multiblock).
[ 16.600781] IFX DEU AES initialized (multiblock).
[ 16.604889] IFX DEU ARC4 initialized (multiblock).
[ 16.609552] IFX DEU SHA1 initialized.
[ 16.613038] IFX DEU MD5 initialized.
[ 16.616702] IFX DEU SHA1_HMAC initialized.
[ 16.620823] IFX DEU MD5_HMAC initialized.
[ 16.668993] nf_conntrack version 0.5.0 (1939 buckets, 7756 max)
[ 16.708762] NET: Registered protocol family 24
[ 16.736864] xt_time: kernel timezone is -0000
[ 16.868225] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[ 16.878345] ath: phy1: Ignoring endianness difference in EEPROM magic
bytes.
[ 16.885788] ath: EEPROM regdomain: 0x833a
[ 16.885808] ath: EEPROM indicates we should expect a country code
[ 16.885830] ath: doing EEPROM country->regdmn map search
[ 16.885845] ath: country maps to regdmn code: 0x37
[ 16.885858] ath: Country alpha2 being used: GB
[ 16.885869] ath: Regpair used: 0x37
[ 16.903335] ieee80211 phy1: Selected rate control algorithm
'minstrel_ht'
[ 16.906738] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xb8000000, irq=30
[ 18.753538] random: nonblocking pool is initialized
[ 21.717054] PTM 1.0.27 PTM (E1) firmware version 0.30
[ 21.720981] ifxmips_ptm: PTM init succeed
[ 24.573078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.593518] device eth0.1 entered promiscuous mode
[ 24.596863] device eth0 entered promiscuous mode
[ 24.618126] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 24.673649] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 25.109616] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 25.277654] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 26.277776] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 26.292445] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 26.428945] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 26.901625] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 27.069640] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 30.075485] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.106450] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.158378] device wlan0 entered promiscuous mode
[ 30.229509] device wlan1 entered promiscuous mode
[ 30.232932] br-lan: port 3(wlan1) entered forwarding state
[ 30.238401] br-lan: port 3(wlan1) entered forwarding state
[ 30.244756] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 31.077554] br-lan: port 3(wlan1) entered disabled state
[ 31.549592] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 33.073687] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.078927] br-lan: port 2(wlan0) entered forwarding state
[ 33.084222] br-lan: port 2(wlan0) entered forwarding state
[ 34.369969] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 34.375173] br-lan: port 3(wlan1) entered forwarding state
[ 34.380491] br-lan: port 3(wlan1) entered forwarding state
[ 35.085527] br-lan: port 2(wlan0) entered forwarding state
[ 36.381523] br-lan: port 3(wlan1) entered forwarding state
[ 36.633779] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 41.817655] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 41.865683] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 42.018573] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 42.721586] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 42.865738] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 42.880439] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 43.329579] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 43.589584] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 47.037574] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 52.053575] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 57.205653] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 57.257680] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 57.407953] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 57.465579] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 58.257748] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 58.272444] /mnt/devel/openwrt/chaos_calmer/build_dir/target-
mips_34kc+dsp_musl-1.1.11/linux-lantiq_xrx200/ltq-ptm-
vr9/ifxmips_ptm_vdsl.c:281:ptm_hard_start_xmit: not in showtime
[ 58.604995] enter showtime
[ 58.609762] enter showtime
[ 62.475148] pppoe-wan: renamed from ppp0
[13253.210885] nf_conntrack: automatic helper assignment is deprecated and
it will be removed soon. Use the iptables CT target to attach helpers
instead.
[204043.688507] ath10k_pci 0000:02:00.0: failed to install key for vdev 0
peer <mac address of ath10k device>: -145
[204043.696307] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from
hardware (-145)
[204046.700587] ath10k_pci 0000:02:00.0: failed to install key for vdev 0
peer <mac address of ath10k device>: -145
[204046.708417] wlan0: failed to set key (1, ff:ff:ff:ff:ff:ff) to
hardware (-145)
}}}
5G wifi devices:
Nexus 5 (2013) - which is always connected/trying to connect
most of the time a QCA9558 device
and today I tried to connect with an Intel AC 7260 notebook (the QCA9558
device was off at this time)
--
Ticket URL: <https://dev.openwrt.org/ticket/20854#comment:14>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
