#20971: WDR4300 crashes at boot
-----------------------+------------------------
Reporter: ivanich | Owner: developers
Type: defect | Status: new
Priority: high | Milestone:
Component: packages | Version: Trunk
Resolution: | Keywords:
-----------------------+------------------------
Comment (by anonymous):
{{{
[ 0.000000] Linux version 4.1.13 (builduser@build_bot_030) (gcc version
5.2.0 (OpenWrt GCC 5.2.0 r47603) ) #1 Thu Nov 26 01:21:41 CET 2015
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32512
[ 0.000000] Kernel command line: board=TL-WDR4300
console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125744K/131072K available (2747K kernel code, 109K
rwdata, 536K rodata, 180K init, 190K bss, 5328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:83
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz,
Ref:40.000MHz
[ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 6825930166 ns
[ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every
7669584382ns
[ 0.007497] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.080012] pid_max: default: 32768 minimum: 301
[ 0.084575] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090907] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.100190] clocksource jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.110227] NET: Registered protocol family 16
[ 0.115632] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
[ 0.124123] registering PCI controller with io_map_base unset
[ 0.350527] PCI host bridge to bus 0000:00
[ 0.354472] pci_bus 0000:00: root bus resource [mem
0x10000000-0x13ffffff]
[ 0.361058] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.366446] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
0x0]
[ 0.372987] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.380699] pci 0000:00:00.0: invalid calibration data
[ 0.386009] pci 0000:00:00.0: BAR 0: assigned [mem
0x10000000-0x1001ffff 64bit]
[ 0.393052] pci 0000:00:00.0: BAR 6: assigned [mem
0x10020000-0x1002ffff pref]
[ 0.399982] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.405576] Switched to clocksource MIPS
[ 0.410548] NET: Registered protocol family 2
[ 0.415655] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.422334] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.428489] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.434663] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.440276] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.446547] NET: Registered protocol family 1
[ 0.451603] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.476040] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.481619] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.493350] io scheduler noop registered
[ 0.497134] io scheduler deadline registered (default)
[ 0.502249] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.532219] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud
= 2500000) is a 16550A
[ 0.540504] console [ttyS0] enabled
[ 0.540504] console [ttyS0] enabled
[ 0.547529] bootconsole [early0] disabled
[ 0.547529] bootconsole [early0] disabled
[ 0.557664] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.563342] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.569079] spi0.0: no TP-Link header found
[ 0.576975] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-
mdio.0
[ 0.642220] libphy: ag71xx_mdio: probed
[ 1.236918] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00
[uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 1.248377] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 1.256797] NET: Registered protocol family 10
[ 1.264654] NET: Registered protocol family 17
[ 1.269300] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.282149] Bridge firewalling registered
[ 1.286362] 8021q: 802.1Q VLAN Support v1.8
[ 1.292871] VFS: Cannot open root device "(null)" or unknown-
block(0,0): error -6
[ 1.300509] Please append a correct "root=" boot option; here are the
available partitions:
[ 1.308991] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[ 1.317371] ---[ end Kernel panic - not syncing: VFS: Unable to mount
root fs on unknown-block(0,0)
}}}
{{{
CC fs/sysfs/mount.o
In file included from drivers/mtd/mtd_blkdevs.c:29:0:
drivers/mtd/mtd_blkdevs.c: In function 'do_blktrans_request':
include/linux/blkdev.h:624:26: warning: switch condition has boolean value
[-Wswitch-bool]
#define rq_data_dir(rq) (((rq)->cmd_flags & 1) != 0)
^
drivers/mtd/mtd_blkdevs.c:100:9: note: in expansion of macro 'rq_data_dir'
switch(rq_data_dir(req)) {
^
}}}
--
Ticket URL: <https://dev.openwrt.org/ticket/20971#comment:1>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
