#22113: wlan1 on Archer C7 not enabled
---------------------------+--------------------------------
Reporter: war@… | Owner: developers
Type: defect | Status: new
Priority: high | Milestone:
Component: base system | Version: Chaos Calmer 15.05
Keywords: hostapt, wifi |
---------------------------+--------------------------------
After upgrade to 15.05.1 the 2.4GHz WiFi does not work anymore.
Syslog:
...
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311):
Configuration file: /var/run/hostapd-phy1.conf
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 27:
unknown configuration item 'eap_server'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 28:
unknown configuration item 'wps_state'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 29:
unknown configuration item 'ap_setup_locked'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 30:
unknown configuration item 'device_type'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 31:
unknown configuration item 'device_name'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 32:
unknown configuration item 'manufacturer'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Line 33:
unknown configuration item 'config_methods'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): 7 errors
found in configuration file '/var/run/hostapd-phy1.conf'
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Failed to
set up interface with /var/run/hostapd-phy1.conf
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Failed to
initialize interface
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): cat: can't
open '/var/run/wifi-phy1.pid': No such file or directory
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Command
failed: Invalid argument
Sun Mar 27 21:57:39 2016 daemon.notice netifd: radio1 (5311): Device setup
failed: HOSTAPD_START_FAILED
...
Most mobile phones require 2.4GHz for WiFi and it is extremely awkward
that this broke.
the hostapd-phy1.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=AT
ieee80211d=1
hw_mode=g
channel=11
ieee80211n=1
ht_coex=0
ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
interface=wlan1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=*****************
auth_algs=1
wpa=2
wpa_pairwise=CCMP TKIP
###### offensive part starts here
eap_server=1
wps_state=2
ap_setup_locked=0
device_type=6-0050F204-1
device_name=OpenWrt AP
manufacturer=openwrt.org
###### end of offensive part
config_methods=push_button
ssid=*************
bridge=br-lan
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
bssid=***********
--
Ticket URL: <https://dev.openwrt.org/ticket/22113>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
