#20982: jffs2-error / nanostation M5 xw / r47658
------------------------+------------------------
  Reporter:  bittorf@…  |      Owner:  developers
      Type:  defect     |     Status:  new
  Priority:  normal     |  Milestone:
 Component:  packages   |    Version:  Trunk
Resolution:             |   Keywords:
------------------------+------------------------

Comment (by johnv):

 Replying to [comment:31 bmoffitt]:

 > 1.) Recovery (tftp) flash AirOS 5.6.3 onto the radio; then
 > 2.) Using the fwupdate command in AirOS, flash AirOS 5.5.11 onto the
 radio; then
 > 3.) Again using the fwupdate command, flash OpenWRT onto the radio.
 >
 > This sequence seems to work on every PicoStation and NanoStation Loco M2
 XM I have gotten SO FAR. Oddly, downgrading a radio that came with AirOS
 5.6 running on it to AirOS 5.5 DID NOT WORK - it appears that it is
 necessary to do the recovery (tftp) flash of AirOS 5.6 before you
 downgrade to 5.5. I honestly cannot explain it, but, so far, this sequence
 seems the only way to reliably flash OpenWRT onto a PicoStation, Bullet,
 or NanoStation Loco M2 that comes running AirOS 5.6.


 Can you confirm the 5.6.X version that was installed on the units when you
 received them?  There is a Fix in the UBNT changelog for 5.6.4:

 - Fix: After FW downgrade to 5.5.6 device goes to read-only state (TFTP
 recovery to previous airOS version is required to restore normal
 operation)


 So wondering if the ones that you have that you are unable to simply
 downgrade back to 5.5.11, are prior to 5.6.4 or not.  And if so, if you
 could upgrade to 5.6.4, then downgrade to 5.5.11, and the OpenWRT.
 Getting messier but still might be easier then tftp.

--
Ticket URL: <https://dev.openwrt.org/ticket/20982#comment:32>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets

Reply via email to