hope this helps: If you need to clone MAC address on the WAN port use MAC address cloning. This is done with the macaddr option in the wan section.
uci set network.wan.macaddr=11:22:33:aa:bb:ccuci commit networkifup wan On Jan 27, 2008 2:32 PM, Kövesdi György <[EMAIL PROTECTED]> wrote: > Hi, > > I have two WL500GP devices, and surprisingly their wlan cards have the > same > mac address. I don't know how could it happen, but the bigger problem is > that > I cannot change its mac address. The only way which works for me is > the 'ifconfig hw ether <address>' command, but the result is not stored > (must > be done after each reboot).The 'option macaddr' and similar settings does > not > work. Where this address is loaded from at startup? From the card? From > flash? > > I use the Kamikaze 7.09 and the original firmware on the other one. Once I > swapped the wlan cards between them. Is it possible that something is > overwritten then? > > Regards > Gyorgy Kovesdi > _______________________________________________ > openwrt-users mailing list > [email protected] > http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users > -- 'If I have seen further it is by standing on the shoulders of Giants'
_______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
