Hi Brian On Sun, Oct 19, 2008 at 10:26:56AM -0400, Brian J. Murrell wrote: > So, I have a working installation of OpenWrt, Kamikaze r12987 on my > WRT54GS (v1), complete with b43 driver and functional AP mode. Yay so > far! you built that with default toolchain > > What I have observed though is that if I try to move any bulk (i.e. lots > of) data through the wireless interface, configured with WPA2, softirq > goes through the roof: > > CPU: 0% usr 0% sys 0% nice 0% idle 0% io 0% irq 99% softirq > Load average: 2.36 0.78 0.29 > PID PPID USER STAT VSZ %MEM %CPU COMMAND > 3 2 root RW< 0 0% 57% [ksoftirqd/0] > 715 1 root R 3932 13% 19% hostapd -B > /var/run/hostapd-wlan0.con > 501 1 root S 1968 7% 10% udhcpc -t 0 -i eth0.1 -b -p > /var/run/ > > I enquired on the bcm43xx-dev list about this and they recommended I ask > OpenWrt people about it. My posting can be seen at: > > https://lists.berlios.de/pipermail/bcm43xx-dev/2008-October/008257.html > > So has anyone else experienced this problem? Any solutions? not exctly this, and i might be competely wrong... i saw several of these througput issues with kamikaze since i started using it ~1y ago. I had always the feeling it has to do with this default gcc-4.1.2 ...
just my 2ct
--Jan
signature.asc
Description: Digital signature
_______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
