On Tuesday 17 March 2009 11:59:13 Erik Sundin wrote: > Den Tuesday 17 March 2009 11.53.18 skrev Michael Buesch: > > On Tuesday 17 March 2009 04:00:38 Stefan Monnier wrote: > > > > My b43 driver works OK nowadays in STA mode, but when I tried to put it > > > > into a bridge with my 5 wired ports, bridging didn't seem to work: > > > > the machine can talk to wireless and wired hosts, but wired hosts can't > > > > talk to wireless hosts via my OpenWRT box. > > > > > > > > Does someone use a similar setup, or can someone spot the problem in my > > > > config below? > > > > > > Nobody uses the b43 driver in STA mode and bridged with some > > > other interface? > > > > There's no reason this should not work. > > However, I guess few people use it, as this kind of setup is very rare. > > I had the same issue, but sadly I lost your original email with the conf in > it.. could you resend it so I could compare it to mine? (you could send it > directly to this adress) Sadly I could never resolve this issue and went with > another device...
I never configured this mode. I do only run b43 in AP mode bridged to ethernet. -- Greetings, Michael. _______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
