The OpenWrt team would like to announce the release of Kamikaze 8.09.2
The official binaries, generated from the 8.09.2 svn tag, can be found
here: http://downloads.openwrt.org/kamikaze/8.09.2/
This is the last update of the 8.09 release series, with the following
notable changes:
* pptp nat contracting removed on brcm-2.4, cause of dnat off-by-one
port forwarding bug
* added antenna gpio support for nanostation loco2
* backported swconfig and IP-175C support for DIR-300 and similar
atheros devices
* added a combined atheros image format with sysupgrade support
* fixed ethernet issues on fonera+
* fixed wgt634u regresssion introduced in 8.09.1
* disabled tcp ecn by default
* improved sysupgrade reliability
* added mtd support for fis table layout on redboot based systems
* add support for creating VMware VMDK images for x86
* fixed ipv6 interface setup on boot
* numerous madwifi fixes
* fixed ImageBuilder and SDK
* fixed failsafe mode on fonera+ and fonera 2.0
* fixed memory leaks in miniupnpd
* fixed escaping issues in ddns-scripts
* update X-Wrt to 8.09.2
* update LuCI to v0.8.8
* security fixes for openswan, tiff, libpng, kernel, curl, gnutls,
openssl and dnsmasq
For a complete list of changes refer to
https://dev.openwrt.org/milestone/Kamikaze%208.09.2
Note: The brcm47xx still won't work for those of you needing broadcom
wifi, stick to brcm-2.4.
We will tell you when it does work.
Yours truly,
--
The release management team
Andy Boyett & Nicolas Thill
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-users
