Hello, I have the following situation:
- Asus WL500g Premium V1 - Backfire, self compiled Squashfs image of current backfire trunk - Flashdrive, with swap and ext3 partition to be used for extroot - I configured /etc/conf/fstab based on wiki. The mount during booting works for both swap and ext3 partition to the target. - If I enable is_rootfs in the fstab, this has no effect on next boot. The system still mounts the partition to the target, but not as rootfs - All necessary packages are enabled (AFAIK) - The jffs continues to be mounted on overlay I tried to analyze the preinit scripts and do unterstand the mechanism. I found a file where the config is parsed etc, but I have no idea how to debug that. Currently I do not have a serial console. I posted all relevant configuration(fdisk -l, df -h, mount, dmesg, /etc/conf/fstab, opkg list_installed) info to pastebin on http://openwrt.pastebin.com/HszpWT74 Questions: 1. can I debug preinit somehow? Maybe by echoing to the LAN 2. any idea about the cause? Do I miss s.th.? Is it supposed to work with 2.4? Regards Sebastian
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
