On Wed, Nov 24, 2010 at 5:26 PM, Jonas Gorski <[email protected]> wrote: > Hi, > > On 25 November 2010 00:08, Greg Oliver <[email protected]> wrote: >> Hi, >> >> Before i pull my hair out, I will ask here. I have tried every >> permutation I can think of to get native vlans (pvid/dot1q mix) >> running on this switch chip. It seems there is only one other entry >> regarding this in the forums with someone with the same issue. I have >> tried past notations for configuring as well, and while the syntax was >> not rejected, it still did not perform like it should. As soon as I >> put a tag on an interface, all untagged vlans stop flowing regardless >> of what I throw at it! :) I have also tried to turn off the vlan >> and just use port pvid and that fails as well. > > Mixing tagged and untagged traffic isn't supported, you can have a > port only as either always tagged or never tagged. Assuming that is > what you want to do.
Yep, mixed with pvid for untagged traffic.. Oh well, I guess I'll have to work around it somehow. Thanks! > Regards, > Jonas _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
