> if the DSL-502T is running openwrt, you could just bridge the > connection. if not, you could configure the RT-N16 to route without > NAT. 192.168.100.2 for the RT-N16, and 192.168.100.1 for the DSL-502T. > add "default via 192.168.100.1" and add a few firewall rules and some > dhcp settings. not sure if the GUI interface supports it, but you can > def. do it via the CLI.
Surely, setting default route via the 192.168.100.1 machine without also setting a Source-hint will cause the 192.168.100.2 IP address to be used for MASQUERADE nat and also any connections made from the machine itself, causing failure to work as 192.168.100.2 to be used on replies from the internet to your network ???? --Simon _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
