I was running a little software VI. I can edit 'vi / etc / config / network', but would need a guide to restore communication parameters for LAN and be able to enter Lucci, and from there reset the parameters. Un saludo. Juan Carlos
> Date: Tue, 5 Apr 2011 11:32:44 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [OpenWrt-Users] Help to reinstall OpenWrt > > > Backfire I have installed, I tried to configure the network and have > > broken the network access, only accessible by com series. > > You could get somebody who understands 'vi' to use the > com-series and 'vi /etc/config/network' to fix it. > > > As I can reinstall openwrt, > If you know how you did it before, they might be able to > use the bootloader to reprogram the openwrt and go > back to default configuration. > > > or how I can regain access by WEB. > You might need to reset the IP-address on the > computer to match the network address range now > in use on the router.... > > Good luck ;-). > > --Simon > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-users
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
