Any ideas on that ? I'll try to get JTAG for this board and debug it anyway I think.
2011/5/15 Cyryl Płotnicki-Chudyk <[email protected]>: > Hello there > I have successfully installed openwrt on routerboard 433uah. > > root@OpenWrt:/# cat /proc/mtd > dev: size erasesize name > mtd0: 0000b000 00001000 "routerboot" > mtd1: 00001000 00001000 "hard_config" > mtd2: 00002000 00001000 "bios" > mtd3: 00001000 00001000 "soft_config" > mtd4: 00040000 00040000 "booter" > mtd5: 005c0000 00040000 "kernel" > mtd6: 1fa00000 00040000 "rootfs" > mtd7: 1f940000 00040000 "rootfs_data" > > I can always boot the kernel by netboot. However booting from NAND > fails sometimes. > The kernel is on the mtd5 partition, I installed it by mounting > mtdblock5 and copying over the image as 'kernel' file. > And while the first one-two boots from nand works then the next ones fail with > > loading kernel from nand... OK > setting up elf image... OK > jumping to kernel code > > and hangs here. > > > My suspicion is that the working system changes something slightly > with NAND and so it fails afterwards. Another guess is that the kernel > boots but fail to print on the serial console. > > Has anyone encountered such a problem ? > How to debug it ? > > -- > cyryl > -- cyryl _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
