Hi,
Having a tricky time connecting two routers. I've got 192.168.1.1/24
which is my main link to the outside world and I've set up a second
router with a wireless interface (static 192.168.1.3/24) connected to
the primary using wpa2/psk. On the client, I've set the interface up to
be (static 192.168.2.1/24). I've set primary and secondary interfaces to
194.168.4.100, and 194.168.8.100 respectively.
At the moment my laptop (connected to the client) can ping the client,
but nothing else. When I log into the client from the laptop, I can ping
the main router, all computers on 192.168.1.0, the laptop, and the
outside world (only by ip address not url).
Can anyone help me with my routing, and getting the client router to use
dns to resolve addresses?
My networking file is
config 'switch' 'eth0'
option 'enable' '1'
config 'switch_vlan' 'eth0_0'
option 'device' 'eth0'
option 'vlan' '0'
option 'ports' '0 1 2 3 5'
config 'switch_vlan' 'eth0_1'
option 'device' 'eth0'
option 'vlan' '1'
option 'ports' '4 5'
config 'interface' 'loopback'
option 'ifname' 'lo'
option 'proto' 'static'
option 'ipaddr' '127.0.0.1'
option 'netmask' '255.0.0.0'
config 'interface' 'lan'
option 'type' 'bridge'
option 'proto' 'static'
option 'netmask' '255.255.255.0'
option 'ifname' 'eth0.0 eth0.1'
option 'ipaddr' '192.168.2.1'
option 'gateway' '192.168.1.3'
list 'dns' '194.168.4.100'
list 'dns' '194.168.8.100'
config 'interface' 'wan'
option '_orig_ifname' 'eth0.1'
option '_orig_bridge' 'false'
option 'proto' 'static'
option 'ipaddr' '192.168.1.3'
option 'netmask' '255.255.255.0'
list 'dns' '194.168.4.100'
list 'dns' '194.168.8.100'
config 'route'
option 'interface' 'lan'
option 'target' '192.168.2.1'
option 'netmask' '255.255.255.0'
option 'gateway' '192.168.1.3'
and my firewall is:
config defaults
option syn_flood 1
option input ACCEPT
option output ACCEPT
option forward REJECT
# Uncomment this line to disable ipv6 rules
# option disable_ipv6 1
config zone
option name lan
option network 'lan'
option input ACCEPT
option output ACCEPT
option forward REJECT
config zone
option name wan
option network 'wan'
option input ACCEPT
option output ACCEPT
option forward REJECT
option masq 0
option mtu_fix 1
config forwarding
option src lan
option dest wan
config forwarding
option src wan
option dest lan
# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
option src wan
option proto udp
option dest_port 68
option target ACCEPT
option family ipv4
# Allow IPv4 ping
config rule
option src wan
option proto icmp
option icmp_type echo-request
option family ipv4
option target ACCEPT
# Allow essential incoming IPv6 ICMP traffic
config rule
option src wan
option proto icmp
list icmp_type echo-request
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
list icmp_type router-solicitation
list icmp_type neighbour-solicitation
option limit 1000/sec
option family ipv6
option target ACCEPT
# Allow essential forwarded IPv6 ICMP traffic
config rule
option src wan
option dest *
option proto icmp
list icmp_type echo-request
list icmp_type destination-unreachable
list icmp_type packet-too-big
list icmp_type time-exceeded
list icmp_type bad-header
list icmp_type unknown-header-type
option limit 1000/sec
option family ipv6
option target ACCEPT
# include a file with users custom iptables rules
config include
option path /etc/firewall.user
Thanks,
James
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-users
